[asterisk-ss7] Please help! | chan_ss7 version 2.1.0

Goke M Aruna goksie at gmail.com
Mon Mar 18 09:24:45 CDT 2013


Can you post your config files?
in the system.conf

bchan=1-15,17-31

dchan=16


Regards

On Mon, Mar 18, 2013 at 1:44 PM, amine <ferhi.med.amine at gmail.com> wrote:

>  @Goke M Aruna : The used cable is a pri  crossed cable.
>
> Telephony card : OpenVox PRI x 4Ports
>
>
> On 03/18/2013 12:36 PM, Goke M Aruna wrote:
>
> Are you using a straight cable or cross cable?
>
>  Regards
>
> On Mon, Mar 18, 2013 at 12:18 PM, amine <ferhi.med.amine at gmail.com> wrote:
>
>>  Hi All,
>>
>> @Matthias van der Vlies : Thanks a lot for the information, indeed that
>> was the solution for my first problem.
>>
>> Now I have a Link with the state INSERVICE in both machines.
>>
>> Machine 1:
>>
>> # rasterisk -x "ss7 link status"
>>
>> linkset:siuc, link:l2/16, state:INSERVICE, sls:1, total: 1261312/1261328
>>
>>
>>
>> Machine 2:
>>
>> # rasterisk -x "ss7 link status"
>>
>> linkset:siuc, link:l2/16, state:INSERVICE, sls:1, total: 1493920/1493952
>>
>>
>> Still i have the next issues :
>>
>> CLI> ss7 linestat
>>
>> Linkset: siuc
>>
>> CIC   1 Idle Reset pending
>>
>> CIC   2 Idle Reset pending
>>
>> CIC   3 Idle Reset pending
>>
>> CIC   4 Idle Reset pending
>>
>> CIC   5 Idle Reset pending
>>
>> CIC   6 Idle Reset pending
>>
>> CIC   7 Idle Reset pending
>>
>> CIC   8 Idle Reset pending
>>
>> CIC   9 Idle Reset pending
>>
>> CIC  10 Idle Reset pending
>>
>> CIC  11 Idle Reset pending
>>
>> CIC  12 Idle Reset pending
>>
>> CIC  13 Idle Reset pending
>>
>> CIC  14 Idle Reset pending
>>
>> CIC  15 Idle Reset pending
>>
>> CIC  17 Idle Reset pending
>>
>> CIC  18 Idle Reset pending
>>
>> CIC  19 Idle Reset pending
>>
>> CIC  20 Idle Reset pending
>>
>> CIC  21 Idle Reset pending
>>
>> CIC  22 Idle Reset pending
>>
>> CIC  23 Idle Reset pending
>>
>> CIC  24 Idle Reset pending
>>
>> CIC  25 Idle Reset pending
>>
>> CIC  26 Idle Reset pending
>>
>> CIC  27 Idle Reset pending
>>
>> CIC  28 Idle Reset pending
>>
>> CIC  29 Idle Reset pending
>>
>> CIC  30 Idle Reset pending
>>
>> CIC  31 Idle Reset pending
>>
>>
>> And within the logs, I have the next messages :
>>
>>  [Mar 18 11:20:28] NOTICE[10687]: l4isup.c:1559 t22_timeout: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=1.
>>
>> [Mar 18 11:20:28] NOTICE[10687]: l4isup.c:1559 t22_timeout: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=17.
>>
>> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5057 l4isup_event: Received UEC (CIC 1), link 'l2'.
>>
>> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=1 for unequipped circuit (typ=UEC), link 'l2'.
>>
>> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5057 l4isup_event: Received UEC (CIC 17), link 'l2'.
>>
>> [Mar 18 11:20:28] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=17 for unequipped circuit (typ=UEC), link 'l2'.
>>
>> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5057 l4isup_event: Received GRS (CIC 1), link 'l2'.
>>
>> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=1 for unequipped circuit (typ=GRS), link 'l2'.
>>
>> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5057 l4isup_event: Received GRS (CIC 17), link 'l2'.
>>
>> [Mar 18 11:20:39] WARNING[10687]: l4isup.c:5069 l4isup_event: Received CIC=17 for unequipped circuit (typ=GRS), link 'l2'.
>>
>>
>> Any information is welcomed, Thanks in advance.
>>
>> Best regards.
>> Amine
>>
>>
>> On 03/18/2013 10:33 AM, Matthias van der Vlies wrote:
>>
>> In case you have HW echo cancellation: don't forget to disable echo
>> cancellation on your signalling channel.
>>
>> Kind regards,
>> Matthias van der Vlies
>>
>> On 03/18/2013 11:23 AM, amine wrote:
>>
>> Hi All,
>>
>> I am new to Asterisk and SS7, I will be exposing the details of my
>> problem here hoping for guidance and/or hints about things that I might
>> missed within my configuration.
>>
>> *Objective : *
>> - Set up SS7 between two Asterisk Boxes using chan_ss7 using PRI
>> Telephony cards cabled directly with a PRI cable.
>>
>> *Current configuration :*
>> - Asterisk : 1.4.39.2
>> - Dahdi : 2.5.0.2
>> - Kernel : 2.6.30.10
>> - chan_ss7 : 2.1.0
>> - 2 Machines : Machine1 (ipbrick144 | 172.31.3.144) + Machine2
>> (ipbrick145 | 172.31.3.145)
>> - chan_dahdi unloaded, chan_ss7 loaded
>>
>> The chan_ss7 loads without problem, but i am not able to have an ALIGNED
>> Link in both machines.
>>
>> # rasterisk -x "ss7 link status"
>>
>> linkset:siuc, link:l2/16, state:NOT_ALIGNED, sls:1, total: 1857882016/1857882048
>>
>> CLI> ss7 linestat
>>
>> Linkset: siuc
>>
>> CIC   1 Idle Reset pending
>>
>> CIC   2 Idle Reset pending
>>
>> CIC   3 Idle Reset pending
>>
>> CIC   4 Idle Reset pending
>>
>> CIC   5 Idle Reset pending
>>
>> CIC   6 Idle Reset pending
>>
>> CIC   7 Idle Reset pending
>>
>> CIC   8 Idle Reset pending
>>
>> CIC   9 Idle Reset pending
>>
>> CIC  10 Idle Reset pending
>>
>> CIC  11 Idle Reset pending
>>
>> CIC  12 Idle Reset pending
>>
>> CIC  13 Idle Reset pending
>>
>> CIC  14 Idle Reset pending
>>
>> CIC  15 Idle Reset pending
>>
>> CIC  17 Idle Reset pending
>>
>> CIC  18 Idle Reset pending
>>
>> CIC  19 Idle Reset pending
>>
>> CIC  20 Idle Reset pending
>>
>> CIC  21 Idle Reset pending
>>
>> CIC  22 Idle Reset pending
>>
>> CIC  23 Idle Reset pending
>>
>> CIC  24 Idle Reset pending
>>
>> CIC  25 Idle Reset pending
>>
>> CIC  26 Idle Reset pending
>>
>> CIC  27 Idle Reset pending
>>
>> CIC  28 Idle Reset pending
>>
>> CIC  29 Idle Reset pending
>>
>> CIC  30 Idle Reset pending
>>
>> CIC  31 Idle Reset pending
>>
>>
>> - Within the logs, i have the next message :
>>
>>  WARNING[13581] mtp.c: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'l2'.
>>
>>
>> - Within the console, i have the next messages when i manually load
>> chan_ss7 :
>>
>> ] NOTICE[23391]: config.c:805 load_config_link: Configured link 'l1' on linkset 'siuc', firstcic=1
>>
>> [Mar 15 16:49:38] NOTICE[23391]: config.c:1278 load_config: Configuring OPC 1, DPC 2 for linkset 'siuc'.
>>
>>     -- Starting cluster thread, pid=23209.
>>
>>   == Registered channel type 'SS7' (SS7 Protocol Driver)
>>
>>     -- Starting continuity check thread, pid=23209.
>>
>> [Mar 15 16:49:38] NOTICE[23391]: mtp.c:2467 mtp_init: Initialising 1 signalling links
>>
>>     -- Starting MTP thread, pid=23209.
>>
>> [Mar 15 16:49:38] WARNING[23391]: utils.c:176 start_thread: Failed to set thread to realtime priority: Operation not permitted.
>>
>>     -- Starting monitor thread, pid=23209.
>>
>> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2348 mtp_init_link: Initialising link 'l1/16', linkset 'siuc', sls 0.
>>
>> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2366 mtp_init_link: Signalling channel on link 'l1/16' has signalling type 0x0080.
>>
>> [Mar 15 16:49:38] NOTICE[23418]: mtp.c:2063 mtp_thread_main: Empty Dahdi output buffer detected, outgoing packets may have been lost on link 'l1'.
>>
>>     -- SS7 channel loaded successfully.
>>
>>  Loaded chan_ss7.so => (SS7 Protocol Support)
>>
>>
>>
>> - The next configuration is the same between the two Asterisk boxes.
>>
>> *ss7.conf**
>> *
>>
>> [linkset-siuc]
>>
>> ; The linkset is enabled
>>
>> enabled => yes
>>
>> ; The end-of-pulsing (ST) is not used to determine when incoming address is complete
>>
>> enable_st => no
>>
>> ; Reply incoming call with CON rather than ACM and ANM
>>
>> use_connect => yes
>>
>> ; The CIC hunting policy (even_mru, odd_lru, seq_lth, seq_htl) is even CIC numbers, most recently used
>>
>> hunting_policy => seq_lth
>>
>> ; Incoming calls are placed in the ss7 context in the asterisk dialplan
>>
>> context => ss7
>>
>> ; The language for this context is da
>>
>> language => da
>>
>> ; The value and action for t35. Value is in msec, action is either st or timeout
>>
>> ; If you use overlapped dialling dial plan, you might choose: t35 => 4000,st
>>
>> t35 => 15000,timeout
>>
>> ; The subservice field: national (8), international (0), auto or decimal/hex value
>>
>> ; The auto means that the subservice is obtained from first received SLTM
>>
>> subservice => auto
>>
>> ; The host running the mtp3 service
>>
>> ;mtp3server => localhost
>>
>> [link-l1]
>>
>> sltm => no
>>
>> linkset => siuc
>>
>> channels => 1-15,17-31
>>
>> schannel => 16
>>
>> firstcic => 1
>>
>> enabled => yes
>>
>> [link-l2]
>>
>> sltm => no
>>
>> linkset => siuc
>>
>> channels => 1-15,17-31
>>
>> schannel => 16
>>
>> firstcic => 1
>>
>> enabled => yes
>>
>> [host-ipbrick145]
>>
>> default_linkset=>siuc
>>
>> enabled => yes
>>
>> opc => 0x1
>>
>> dpc => siuc:0x2
>>
>> links => l1:1
>>
>> if-1 => 172.31.3.145
>>
>> [host-ipbrick144]
>>
>> default_linkset=>siuc
>>
>> enabled => yes
>>
>> opc => 0x1
>>
>> dpc => siuc:0x2
>>
>> links => l2:1
>>
>> if-1 => 172.31.3.144
>>
>>
>> */etc/dahdi/system.conf *(I tryed using mtp & bchan, the result was the
>> same)
>> *
>> *
>>
>> span=1,1,0,ccs,hdb3
>>
>> bchan=1-15,17-31
>>
>> #mtp2=16
>>
>> bchan=16
>>
>> *
>> ** *
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20130318/96b64a9e/attachment-0001.htm>


More information about the asterisk-ss7 mailing list