[asterisk-ss7] Warning & ERROR message on SS7

[Kaloyan Kovachev]

On 2013-08-13 15:23, Akib Sayyed wrote:
> Here is my config
> 
> ; [span_1]
> ;signalling=pri_cpe
> ;switchtype=euroisdn
> ;pridialplan=national
> ;prilocaldialplan=national
> ;group=0
> ;context=from-digital
> ;channel=1-15,17-31
> context=from-pstn
> group=0
> echocancel=no
> signalling=ss7 ;this is ss7 signalling
> ss7type=itu ;using the ITU variant
> ss7_called_nai=dynamic ;NAI for outgoing calls
> ss7_calling_nai=dynamic ;NAI for incoming calls
> ss7_internationalprefix=00 ;internation prefixvalue for incoming calls
> ss7_nationalprefix=0 ;national prefix value for incoming calls
> ss7_subscriberprefix= ;subscriber prefixvalue for incoming calls
> ss7_unknownprefix= ;unknown prefix value for incoming calls
> ss7_explictacm=yes ;ACM is send as soon as call enters the
> dialplan...may not accepted yet though
> linkset=1 ;arbitary name forthis set of channels
> pointcode=6710 ;the point code forthis system...aka SPC
> adjpointcode=s-8193 ;the point code forthe system that we are

adjpointcode is wrong, maybe you mean 8193 without 's-'

> signalling to... aka APC
> defaultdpc=161 ;the point code forthe system that the CICs will be
> negoiated with...aka DPC
> networkindicator=national_spare ;NI value for MTP3
> ;cicbeginswith=158 ;the starting valueof the CICs
> ;channel=158-186 ;the channels thatare CICs
> sigchan=1 ;the signalling channel

this sigchan has no any CICs defined, so the entire linkset is useless 
or missconfigured

> 
> context=from-pstn
> group=1
> echocancel=no
> signalling=ss7 ;this is ss7 signalling
> ss7type=itu ;using the ITU variant
> ss7_called_nai=international ;NAI for outgoing calls
> ss7_calling_nai=dynamic ;NAI for incoming calls
> ss7_internationalprefix=00 ;internation prefixvalue for incoming calls
> ss7_nationalprefix=0 ;national prefix value for incoming calls
> ss7_subscriberprefix=1 ;subscriber prefixvalue for incoming calls
> ss7_unknownprefix= ;unknown prefix value for incoming calls
> ss7_explictacm=yes ;ACM is send as soon as call enters the
> dialplan...may not accepted yet though
> linkset=2 ;arbitary name forthis set of channels
> pointcode=6700 ;the point code forthis system...aka SPC
> adjpointcode=6081;the point code forthe system that we are signalling
> to... aka APC
> defaultdpc=162 ;the point code forthe system that the CICs will be
> negoiated with...aka DPC
> networkindicator=national ;NI value for MTP3
> cicbeginswith=3 ;the starting valueof the CICs
> channel=3-155 ;the channels thatare CICs

Are you sure this is the way they are configured at the remote side? 
Please check with your peer or capture the signalling after a reconnect 
so you can see the groups they are trying to reset.

> ;channel=33-63
> sigchan=2 ;the signalling channel


both the CICs range defined and the use of two sigchans from the same 
span seems weird to me ... what is the topology of your connection with 
the peer?

> 
> On Tue, Aug 13, 2013 at 5:51 PM, Kaloyan Kovachev <kkovachev at varna.net> 
> wrote:
> 
> On 2013-08-13 15:12, Akib Sayyed wrote:
> 
> Dear All
> 
> I am getting following message on my asterisk ss7 installation
> 
> ERROR[13077]: chan_dahdi.c:14445 dahdi_ss7_error: [2] !! Unable to
> handle message of type 0x31 on CIC 3
> 
> WARNING[13077]: sig_ss7.c:424 ss7_find_cic_gripe: Linkset 2: SS7 GRS
> requested unconfigured CIC/DPC 3/161
> 
> call is established perfect but just wanted to know what these error
> and warning means
> 
> It seems you have CICs miss-configuration with the remote side and i 
> wonder how the call is established at all.
> Please show your config
> 
> --
> Akib Sayyed
> Matrix-Shell
> akibsayyed at gmail.com
> akibsayyed at matrixshell.com
> Mob:- +91-966-514-2243 [1]
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] 
> --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3]
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com [2] 
> --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7 [3]
> 
> --
> Akib Sayyed
> Matrix-Shell
> akibsayyed at gmail.com
> akibsayyed at matrixshell.com
> Mob:- +91-966-514-2243
> 
> 
> 
> Links:
> ------
> [1] tel:%2B91-966-514-2243
> [2] http://www.api-digital.com
> [3] http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7