[asterisk-ss7] linkset and CIC configuration

[Frederic Van Espen]

Hi,

I have 5 E1's connected to my asterisk box. These are connected to 2 
STP's (pointcodes 1 and 2) through a MGW. Behind the STP's there's an 
MSC (pointcode 3). Our box is assigned pointcode 4.

The first channel of the first 4 E1's are signalling channels. The first 
2  E1's are set towards STP1, the 2 following towards STP2. The fifth 
one is not clear to me where it is going (Does it matter? There;s only 
CIC's on this E1) How would I go about configuring chan_dahdi.conf? I'm 
using the patched asterisk 11.5.0 with the patched libss7 as described 
in 
https://issues.asterisk.org/jira/browse/SS7-27?focusedCommentId=208465&page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel#comment-208465


Here's what I currently have:
[channels]

switchtype=EuroISDN
context=incoming
group=1

ss7type=itu
signalling=ss7
networkindicator=national
linkset=1
pointcode=4
adjpointcode=1
defaultdpc=3
sigchan=1
sigchan=32
ss7type=itu
networkindicator=national
linkset=2
pointcode=4
adjpointcode=2
defaultdpc=3
sigchan=63
sigchan=94


ss7_called_nai=national
ss7_calling_nai=national
ss7_internationalprefix=
ss7_nationalprefix=
ss7_subscriberprefix=
ss7_unknownprefix=
echocancel=yes
echocancelwhenbridged=no
echotraining=no

pridialplan=unknown
prilocaldialplan=unknown

cicbeginswith=34
channel=2-31
cicbeginswith=66
channel=33-62
cicbeginswith=98
channel=64-93
cicbeginswith=130
channel=95-124
cicbeginswith=161
channel=125-155

For some incoming IAM's I see this in the logs:
[Aug 13 09:07:31] VERBOSE[31407] sig_ss7.c: [Aug 13 09:07:31] Linkset 0: 
Processing event: ISUP_EVENT_IAM

Linkset 0! It seems like asterisk can not detect the linkset on which 
theis message entered.

Any thoughts and/or recommendations?

Thanks,

Frederic