[asterisk-ss7] ALIGNMENT Problem

[Marcus Vinicius]

Hi,

I run ss7linktest with information sent me by telco, but I get the same error:


./ss7linktest 16 itu 781 678

Starting link 1
Link state change: IDLE -> NOTALIGNED
Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIO

Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIO

Link state change: NOTALIGNED -> ALIGNED
Len = 4 [ ff ff 01 02 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIE

Len = 4 [ ff ff 01 02 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIE

Link state change: ALIGNED -> PROVING
Len = 4 [ ff ff 01 03 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIOS

Link state change: PROVING -> IDLE
Link state change: IDLE -> NOTALIGNED
Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIO

Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIO

Link state change: NOTALIGNED -> ALIGNED
Len = 4 [ ff ff 01 02 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIE

Len = 4 [ ff ff 01 02 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIE

Link state change: ALIGNED -> PROVING
Len = 4 [ ff ff 01 03 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIOS

Link state change: PROVING -> IDLE
Link state change: IDLE -> NOTALIGNED
Len = 4 [ ff ff 01 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] LSSU SIO



I don't have any slip or crc error. The link looks good, but it can't gets up;

thanks

--
Marcus




________________________________
 De: Kaloyan Kovachev <kkovachev at varna.net>
Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br> 
Enviadas: Segunda-feira, 28 de Maio de 2012 11:27
Assunto: Re: [asterisk-ss7] ALIGNMENT Problem
 
try ss7lintest from libss7 with asterisk stopped:
ss7linktest 16 itu XXX YYY

and see if it will align

On Mon, 28 May 2012 07:05:10 -0700 (PDT), Marcus Vinicius
<marc_mcs10 at yahoo.com.br> wrote:
> Hello,
> 
> The config are correct according from telco: 
> 
> 
> 
> signalling=ss7
> ss7type=itu
> ss7_called_nai=dynamic
> ss7_calling_nai=dynamic
> networkindicator=national
> pointcode=781
> 
> linkset=1
> pointcode=XXX
> defaultdpc=YYY
> adjpointcode=YYY
> context=from-pstn-01
> 
> group=1
> cicbeginswith=1
> channel=>1-15
> 
> cicbeginswith=301
> channel=>17-31
> sigchan=16
> 
> 
> 
> I'll see the cables, but the link is UP: 
> 
> 
> Description                              Alarms  IRQ    bpviol CRC   
Fra
> Codi Options  LBO
> AP408 Card 1 Span 1                      OK      0      0      0     
CCS
> HDB3          0 db (CSU)/0-133 feet (DSX-1)
> 
> 
> 
> Thanks a lot
> 
> 
> --
> Marcus
> 
> 
> 
> 
> ________________________________
>  De: Kaloyan Kovachev <kkovachev at varna.net>
> Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br>;
> asterisk-ss7 at lists.digium.com 
> Enviadas: Segunda-feira, 28 de Maio de 2012 6:18
> Assunto: Re: [asterisk-ss7] ALIGNMENT Problem
>  
> Hi,
> 
> On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius
> <marc_mcs10 at yahoo.com.br> wrote:
>> Hi,
>> 
>> I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG)
> because
>> the link doesn't pass the "PROVING" state. 
>> 
>> All configurations are correct according from telco, but I always get
> the
>> same logs: 
> 
> check your cables and double check your config for the correct signaling
> channel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120528/6b1353dc/attachment.htm>