[asterisk-ss7] ALIGNMENT Problem

[Marcus Vinicius]

Hello,

The config are correct according from telco: 



signalling=ss7
ss7type=itu
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
networkindicator=national
pointcode=781

linkset=1
pointcode=XXX
defaultdpc=YYY
adjpointcode=YYY
context=from-pstn-01

group=1
cicbeginswith=1
channel=>1-15

cicbeginswith=301
channel=>17-31
sigchan=16



I'll see the cables, but the link is UP: 


Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
AP408 Card 1 Span 1                      OK      0      0      0      CCS HDB3          0 db (CSU)/0-133 feet (DSX-1)



Thanks a lot


--
Marcus




________________________________
 De: Kaloyan Kovachev <kkovachev at varna.net>
Para: Marcus Vinicius <marc_mcs10 at yahoo.com.br>; asterisk-ss7 at lists.digium.com 
Enviadas: Segunda-feira, 28 de Maio de 2012 6:18
Assunto: Re: [asterisk-ss7] ALIGNMENT Problem
 
Hi,

On Thu, 24 May 2012 06:47:28 -0700 (PDT), Marcus Vinicius
<marc_mcs10 at yahoo.com.br> wrote:
> Hi,
> 
> I can't alignment a libss7 Asterisk with a TDM switch (Huawei/UMG)
because
> the link doesn't pass the "PROVING" state. 
> 
> All configurations are correct according from telco, but I always get
the
> same logs: 

check your cables and double check your config for the correct signaling
channel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120528/3455bd20/attachment.htm>