[asterisk-ss7] chan_ss7 incoming callbycall call problems
Simon Handschin
simon.handschin at gmail.com
Fri Mar 2 14:36:47 CST 2012
Hi thank you for your fast answer.
Its about carrier pre selection eg i make a call from an external phone
(not connected to the server) with our cpc like 1234.
12340041441234567
The Call will be routet to our server from the provider. They have enbloc
enabled.
Dialplan is like exten => _12340041xxxxxxxxxx (for switzerland and i know
digits lenght)
Its the # key because of the enbloc from our Provider?
Greetings,
Simon
Am 02.03.2012 20:37 schrieb <florian at gruendler.net>:
> Define "callbycall" number. What is the callflow?
> Accepted where, by what equipment?
> Are you trying to describe something which has to do with overlap vs.
> enbloc
> dialing in a call-through scenario with digit collection on Asterisk or is
> this a one stage call where the call enters and leaves Asterisk in one go?
> By what means is this ISDN phone connected to the Asterisk machine?
> How does the dialplan look like?
>
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: asterisk-ss7-bounces at lists.digium.com [mailto:asterisk-ss7-
> > bounces at lists.digium.com] Im Auftrag von Simon Handschin
> > Gesendet: Freitag, 2. März 2012 20:07
> > An: asterisk-ss7 at lists.digium.com
> > Betreff: [asterisk-ss7] chan_ss7 incoming callbycall call problems
> >
> > Hello everyone.
> >
> > I have a problem. I have a callbycall number routet to our E1 Server.
> > If i Dial from my ISDN Phone to this callbycall number the call only get
> > acceptet if i press # key. Normal dial in and out works on our server
> just
> if
> > dial with call by call it did not work.
> >
> > I Use
> >
> > Sangoma A104 Card (Only 1 Port is Used)
> >
> > Asterisk 1.8.9.3
> > Dahdi 2.6
> > chan_ss7 2.1.0
> > Wanpipe 3.5.25
> >
> > dahdi systems.conf
> >
> > #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated
> on
> > 2012-03-02 #Dahdi Channels Configurations #For detailed Dahdi options,
> view
> > /etc/dahdi/system.conf.bak loadzone=de defaultzone=de
> >
> > #Sangoma A104 port 1 [slot:3 bus:13 span:1] <wanpipe1>
> > span=1,0,0,ccs,hdb3,crc4
> > bchan=1-31
> > echocanceller=mg2,2-31
> > #hardhdlc=1
> >
> > wanpipe1.conf
> >
> >
> > #================================================
> > # WANPIPE1 Configuration File
> > #================================================
> > #
> > # Date: Wed Dec 6 20:29:03 UTC 2006
> > #
> > # Note: This file was generated automatically
> > # by /usr/local/sbin/setup-sangoma program.
> > #
> > # If you want to edit this file, it is
> > # recommended that you use wancfg program
> > # to do so.
> > #================================================
> > # Sangoma Technologies Inc.
> > #================================================
> >
> > [devices]
> > wanpipe1 = WAN_AFT_TE1, Comment
> >
> > [interfaces]
> > w1g1 = wanpipe1, , TDM_VOICE, Comment
> >
> > [wanpipe1]
> > CARD_TYPE = AFT
> > S514CPU = A
> > CommPort = PRI
> > AUTO_PCISLOT = NO
> > PCISLOT = 3
> > PCIBUS = 13
> > FE_MEDIA = E1
> > FE_LCODE = HDB3
> > FE_FRAME = CRC4
> > FE_LINE = 1
> > TE_CLOCK = MASTER
> > TE_REF_CLOCK = 0
> > TE_SIG_MODE = CCS
> > TE_HIGHIMPEDANCE = NO
> > TE_RX_SLEVEL = 430
> > HW_RJ45_PORT_MAP = DEFAULT
> > LBO = 120OH
> > FE_TXTRISTATE = NO
> > MTU = 1500
> > UDPPORT = 9000
> > TTL = 255
> > IGNORE_FRONT_END = NO
> > TDMV_SPAN = 1
> > TDMV_DCHAN = 0
> > TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS
> > Blue Alarm and keep line down
> > #wanpipemon -i w1g1 -c Ttx_ais_off to
> disable
> > AIS maintenance mode
> > #wanpipemon
> -i w1g1 -c
> > Ttx_ais_on to enable AIS maintenance mode
> > TDMV_HW_DTMF = NO # YES: receive dtmf events from
> hardware
> > TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz
> events from
> > hardware
> > HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation
> > enabled with nlp (default)
> >
> # OCT_SPEECH:
> > improves software tone detection by disabling NLP (echo possible)
> >
> #
> > OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.
> > HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of
> > incoming media (must have hwdtmf enabled)
> > HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on
> > the line - could break fax
> > HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic
> > echo cancelation
> > HWEC_NLP_DISABLE = NO # NO: default YES: guarantees
> > software tone detection (possible echo)
> > HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio
> > level to be maintained (-20 default)
> > HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio
> > level to be maintained (-20 default)
> > HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to
> be
> > applied to tx signal
> > HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to
> be
> > applied to tx signal
> >
> > [w1g1]
> > ACTIVE_CH = ALL
> > TDMV_HWEC = NO
> > MTU = 8
> >
> >
> > ss7.conf
> >
> > [linkset-siuc]
> > enabled => yes
> > enable_st => no
> > use_connect => no
> > hunting_policy => even_mru
> > context => ss7
> > language => de
> > t35 => 4000,st
> > subservice => auto
> > variant => ITU
> >
> >
> > [link-l1]
> > linkset => siuc
> > channels => 2-31
> > schannel => 1
> > firstcic => 1
> > enabled => yes
> > sltm => no
> > sls=0
> > echocancel => no
> > echocan_train => 350
> > echocan_taps => 128
> >
> > [host-SS7-1]
> > if-1 => 10.1.40.71
> > enabled => yes
> > opc => 1601
> > dpc => siuc:300
> > links => l1:1 ;span 1 of dahdi/system.conf
> > ;globaltitle => 0x00, 0x03, 0x01, 7773
> > ssn => 7
> >
> >
> > Anyone got an idea about this?
> >
> > Greetings
> >
> > Simon
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120302/efb7d7bf/attachment-0001.htm>
More information about the asterisk-ss7
mailing list