[asterisk-ss7] Asterisk 1.4.29.1 // chan_ss7-1.4.3 // Digium TE420P Signalling lost

Thu Jan 12 04:36:40 CST 2012

Try to put the following
sltm => no
after your schannel definition.
It was the only thing that worked for me when I was in your situation.

I can see that you already had that ;sltm = no commented, but you have an error there you should put "=>" instead of "="

Regards,
Antoine Megalla

________________________________
 From: Diego Reinoso <dreinoso at teamsourcing.com.ec>
To: asterisk-ss7 at lists.digium.com 
Sent: Thursday, 12 January 2012, 1:36
Subject: [asterisk-ss7] Asterisk 1.4.29.1 // chan_ss7-1.4.3 // Digium TE420P Signalling lost

Few days ago I lost signalling in my asterisk box. 

I am unaviable to capture signalling packets from "ss7 dump", my card its ok, "ss7 dump" creates the fil but it is empty, I execute "ss7 reset" but nothing is printed in the file.

I can see all my 4 E1s ok without errors.  This is dahdi_tool output:

 Alarms          Span                                               â                                                           
â     OK              T4XXP (PCI) Card 0 Span 1                       â  â                                                           
â     OK              T4XXP (PCI) Card 0 Span 2                       â®  â                                                          
â     OK              T4XXP (PCI) Card 0 Span 3                       â® â                                                           
â     OK              T4XXP (PCI) Card 0 Span 4 

This is my system.conf

# Autogenerated by /usr/sbin/dahdi_genconf on Tue Feb 15 11:56:32 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) 
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

span=2,2,0,ccs,hdb3,crc4
bchan=32-62
echocanceller=mg2,32-46,48-62

# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" 
span=3,3,0,ccs,hdb3,crc4
bchan=63-93
echocanceller=mg2,63-77,79-93

# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" 
span=4,4,0,ccs,hdb3,crc4
bchan=94-124
echocanceller=mg2,94-108,110-124

# Global data
loadzone        = us
defaultzone     = us

This is my ss7.conf

[linkset-A]
enabled => yes
enable_st => yes
use_connect => yes
hunting_policy => even_mru
;t35 => 15000,timeout
subservice => auto
context => ivr
language => en
;t35 => 4000,st
;grs => no

[link-l1]
;sltm = no
linkset => A
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes

[link-l2]
;sltm = no
linkset => A
channels => 1-31
schannel =>
firstcic => 33
enabled => yes
[link-l3]
;sltm = no
linkset => A
channels => 1-31
schannel => 
firstcic => 65
enabled => yes

[link-l4]
;sltm = no
linkset => A
channels => 1-31
schannel => 
firstcic => 97
enabled => yes

[host-anywayvoice1]
if-1 => 10.222.80.78
enabled => yes
default_linkset=>A
opc => 1792
dpc => A:11904,l1:12607,l2:12607,l3:12607,l4:12607
links => l1:1,l2:2,l3:3,l4:4

And this is my error log:

[Jan 11 18:27:42] NOTICE[4557] l4isup.c: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=1.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: T23 timeout (No "circuit group reset acknowledge" from peer) CIC=1.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: T23 timeout (No "circuit group reset acknowledge" from peer) CIC=17.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] NOTICE[4557] l4isup.c: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=33.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: T23 timeout (No "circuit group reset acknowledge" from peer) CIC=33.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] NOTICE[4557] l4isup.c: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=65.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: T23 timeout (No "circuit group reset acknowledge" from peer) CIC=65.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] NOTICE[4557] l4isup.c: T22 timeout (No "circuit group reset acknowledge" from peer) CIC=97.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: T23 timeout (No "circuit group reset acknowledge" from peer) CIC=97.
[Jan 11 18:27:42] WARNING[4557] l4isup.c: MTP send fifo not ready, lsi=0.
[Jan 11 18:28:42] WARNING[4557] mtp.c: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'l1'.
[Jan 11 18:29:59] WARNING[4557] mtp.c: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial alignment failed on link 'l1'.

Hope someone could give a clue where the error could be.

Regards Diego.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120112/89ffc7ae/attachment.htm>