[asterisk-ss7] CIC isn't same of Telco

[Gustavo Mársico]

Just to mention, Alcatel S12 and Neax 61E aren't softswitches, they're good old fashion TDM switches.

If you need to ITX with 4 different switches you will need at least 4 SPC, and you defined just 2 (80 as STP and 100 as SP).

Guessing that S12_01 and NEAX_02 are acting as STP for S12_02 and NEAX_01, and assuming S12_01 is 80, S12_02 is 100, NEAX_01 is 120 and NEAX_02 is 140, it should be something like this:

;s12_01
;because you've cic's with S12_01
linkset=1
pointcode=80
adjpointcode=80

cicbeginswith = 1
networkindicator=national
sigchan = 16
channel = 1-15,17-31

;s12_02
;just cics
linkset=2
pointcode=100
adjpointcode=80				'STP s12_01
defaultdpc=80

cicbeginswith = 1
networkindicator=national
channel = 32-62

;neax_01
;just cics
linkset=3
pointcode=120
adjpointcode=140			'STP neax_02
defaultdpc=140

cicbeginswith = 1
networkindicator=national
channel = 63-93

;neax_02
;because you've cic's with neax_02
linkset=4
pointcode=140
adjpointcode=140

cicbeginswith = 1
networkindicator=national
sigchan = 109
channel = 94-108,110-124


In any case, you can use 1-31 as CIC in that scenario, you just need to get the proper information to define the linksets.

Regards

Gustavo


On Oct 31, 2011, at 8:13 PM, Rodrigo Ricardo Passos wrote:

> Hi all,
> 
> I have the following scenario:
> 
> The telco company uses 4 different Softswitchs to compose my SS7 interconnection, so 4 E1s to have redundancy.  Each this one uses channels 1 up to 31. The map of the firsts is equal the ID of the asterisk channels, but the next ID´s isn't the same and the signaling doesn't work. The telco cannot change the CIC configuration to have the same CIC in my configuration. I have one TE405P. The only way to solve this problem is change the CIC in the telco company or i can change CIC maps in my asterisk box? Only the first E1 align with the first softswitch.  When I a place a call using channel 64 of my third E1, telco doesn't have CIC 64, but have CIC 2 and the cannot be complete because the CIC isn't the same. What is the solution?
> 
> First E1:  Asterisk: 1 - 31 (16 signaling) -  Alcatel: S12_01 1-31 (16 signaling)
> Second E1 Asterisk: 32 - 62 (no signaling - voice only) - Alcatel: S12_02 1 - 31
> Third E1: Asterisk: 63 - 93 (no signaling - voice only) - NEC: NEAX_01  1 - 31
> Fourth E1: Asterisk: 94 - 124 (16 signaling) - NEC: NEAX_02 1 - 31
> 
> All dpcs are different; each this one have an unique ID for each E1, only problem is the signaling.
> My configurations are:
> 
> system.conf:
> span=1,1,0,ccs,hdb3
> # termtype: unknown
> bchan=1-15,17-31
> mtp2=16
> 
> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS
> span=2,1,0,ccs,hdb3
> # termtype: unknown
> bchan=32-62
> 
> # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS
> span=3,1,0,ccs,hdb3
> # termtype: unknown
> bchan=63-93
> 
> # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS
> span=4,1,0,ccs,hdb3
> # termtype: unknown
> bchan=94-107,110-124
> mtp2=108
> 
> # Global data
> 
> loadzone        = us
> defaultzone     = us
> 
> 
> chan_dahdi.conf:
> 
> [trunkgroups]
> 
> [channels]
> context=interconexoes
> ss7type=itu
> signalling=ss7
> ss7_called_nai=dynamic
> ss7_calling_nai=dynamic
> networkindicator=national
> echotraining=yes
> echotraining=800
> echocancel=yes
> 
> group=1
> 
> linkset=1
> pointcode=100
> defaultdpc=80
> adjpointcode=80
> 
> cicbeginswith=1
> channel=1-15
> cicbeginswith=17
> channel=17-31
> sigchan=16
> 
> cicbeginswith=32
> channel=32-62
> 
> pointcode=100
> defaultdpc=90
> adjpointcode=90
> 
> cicbeginswith=63
> channel=63-93
> 
> cicbeginswith=94
> channel=94-107
> cicbeginswith=110
> channel=110-124
> sigchan=108
> 
> 
> 
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-ss7