[asterisk-ss7] libss7 terminate digit
Michael Mueller
ss7box at gmail.com
Fri Nov 11 11:02:55 CST 2011
end-of-pulse digit is 0xf (hex F, decimal 15, binary 1111, bcd value
is not defined but '#' is used to represent it and causes decades of
confusion)
On Fri, Nov 11, 2011 at 10:25 AM, Germán I. Paul <gpaul at g-com.com.ar> wrote:
> Thank you for your fast answer people, I didn`t know about such a
> termination digit, I tried putting * or # on the dialplan, but on sst debug
> it doesn`t appears, as an other digit, always I see the number and a #, this
> is ss7 called party debug
>
> Called Party Number:
> Nature of address: 1
> NI: 0
> Numbering plan: 1
> Address signals: 023224701060#
>
> it doesn´t change whatever I add at the end of dialplan, I tried
>
> exten => _X.,1,dial(DAHDI/g0/${EXTEN}*)
> exten => _X.,1,dial(DAHDI/g0/${EXTEN}#)
> exten => _X.,1,dial(DAHDI/g0/${EXTEN})
>
> Now, that you have said me that I can`t send an N, at the en of the dial, I
> want to send an * or an #
>
> Regards
> Germán
>
> --------------------------------------------------
> From: "Kaloyan Kovachev" <kkovachev at varna.net>
> Sent: Friday, November 11, 2011 12:58 PM
> To: <asterisk-ss7 at lists.digium.com>
> Subject: Re: [asterisk-ss7] libss7 terminate digit
>
>> Hi,
>> there is no such thing like N with SS7 - 0123456789ABCD*# are the
>> possible options with '*' = 'e' and '#' = 'f'
>>
>> On Fri, 11 Nov 2011 11:43:54 -0300, "Germán I. Paul" <gpaul at g-com.com.ar>
>> wrote:
>>>
>>> Hi.
>>> Can someone of you tellme how can I add an N at the end of the
>>
>> dialed
>>>
>>> extension using libss7?
>>> I`ve tried adding it on the dialplan, asterisk execute that OK, but when
>>
>> I
>>>
>>> debug the linkset, on called party signal it doesen`t appears.
>>> I say, if I dial 02322674501, on the called party signal should appear
>>> 02322674501N.
>>> I`m connected to a Siemens EWSD.
>>> Thank you for your atention and sorry for my poor english
>>>
>>> Regards
>>> German
>>>
>>>
>>> From: bipin singh
>>> Sent: Wednesday, November 02, 2011 12:32 AM
>>> To: asterisk-ss7 at lists.digium.com
>>> Subject: Re: [asterisk-ss7] CIC isn't same of Telco
>>>
>>>
>>> Hi,
>>> In this case sigchan=16 on both ss7 link and working .
>>>
>>> On Tue, Nov 1, 2011 at 6:11 PM, Rodrigo Ricardo Passos
>>> <rodrigopassos at gmail.com> wrote:
>>>
>>>
>>> Hi bipin.
>>> Thanks for your return.
>>> The problem is because the cicbeginswith initialize with 32 and need
>>
>> to
>>>
>>> be 1 in range of 32 up to 62. The correlated CIC in the telco switch
>>
>> is 1
>>>
>>> and not 32.
>>>
>>> Em 01/11/2011 02:38, bipin singh escreveu:
>>> Hi ,
>>> Try This if your dahdi_tool show ok working on same
>>
>> APC
>>>
>>> and DCP,
>>>
>>>
>>>
>>> [trunkgroups]
>>>
>>>
>>> [channels]
>>> group=1
>>> context=outbound
>>> usecallerid=yes
>>> hidecallerid=no
>>> callwaiting=yes
>>> usecallingpres=no
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> canpark=yes
>>> cancallforward=yes
>>> faxdetect=both
>>>
>>>
>>> callprogress=no
>>> progzone=in
>>> pulsedial=yes
>>> ;busydetect=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>> rxgain=0.5
>>> txgain=0.5
>>> callgroup=1
>>> pickupgroup=1
>>>
>>>
>>> signalling=ss7
>>> ss7type=itu
>>> linkset=1
>>> networkindicator=national
>>> pointcode=xxxxx
>>> defaultdpc=xxxxx
>>> group=1
>>> adjpointcode=xxxx
>>> mtp2=16
>>> sigchan=16
>>> cicbeginswith=1
>>> channel=1-15
>>> cicbeginswith=17
>>> channel=17-31
>>>
>>>
>>> group=2
>>> cicbeginswith=32
>>> channel=32-46,48-62
>>>
>>>
>>> On Tue, Nov 1, 2011 at 4:43 AM, Rodrigo Ricardo Passos
>>> <rodrigopassos at gmail.com> wrote:
>>>
>>> Hi all,
>>>
>>> I have the following scenario:
>>>
>>> The telco company uses 4 different Softswitchs to compose my SS7
>>> interconnection, so 4 E1s to have redundancy. Each this one uses
>>> channels 1 up to 31. The map of the firsts is equal the ID of the
>>> asterisk channels, but the next ID´s isn't the same and the
>>
>> signaling
>>>
>>> doesn't work. The telco cannot change the CIC configuration to
>>
>> have
>>>
>>> the same CIC in my configuration. I have one TE405P. The only way
>>
>> to
>>>
>>> solve this problem is change the CIC in the telco company or i can
>>> change CIC maps in my asterisk box? Only the first E1 align with
>>
>> the
>>>
>>> first softswitch. When I a place a call using channel 64 of my
>>
>> third
>>>
>>> E1, telco doesn't have CIC 64, but have CIC 2 and the cannot be
>>> complete because the CIC isn't the same. What is the solution?
>>>
>>> First E1: Asterisk: 1 - 31 (16 signaling) - Alcatel: S12_01 1-31
>>> (16 signaling)
>>> Second E1 Asterisk: 32 - 62 (no signaling - voice only) - Alcatel:
>>> S12_02 1 - 31
>>> Third E1: Asterisk: 63 - 93 (no signaling - voice only) - NEC:
>>> NEAX_01 1 - 31
>>> Fourth E1: Asterisk: 94 - 124 (16 signaling) - NEC: NEAX_02 1 - 31
>>>
>>> All dpcs are different; each this one have an unique ID for each
>>
>> E1,
>>>
>>> only problem is the signaling.
>>> My configurations are:
>>>
>>> system.conf:
>>> span=1,1,0,ccs,hdb3
>>> # termtype: unknown
>>> bchan=1-15,17-31
>>> mtp2=16
>>>
>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS
>>> span=2,1,0,ccs,hdb3
>>> # termtype: unknown
>>> bchan=32-62
>>>
>>> # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS
>>> span=3,1,0,ccs,hdb3
>>> # termtype: unknown
>>> bchan=63-93
>>>
>>> # Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS
>>> span=4,1,0,ccs,hdb3
>>> # termtype: unknown
>>> bchan=94-107,110-124
>>> mtp2=108
>>>
>>> # Global data
>>>
>>> loadzone = us
>>> defaultzone = us
>>>
>>>
>>> chan_dahdi.conf:
>>>
>>> [trunkgroups]
>>>
>>> [channels]
>>> context=interconexoes
>>> ss7type=itu
>>> signalling=ss7
>>> ss7_called_nai=dynamic
>>> ss7_calling_nai=dynamic
>>> networkindicator=national
>>> echotraining=yes
>>> echotraining=800
>>> echocancel=yes
>>>
>>> group=1
>>>
>>> linkset=1
>>> pointcode=100
>>> defaultdpc=80
>>> adjpointcode=80
>>>
>>> cicbeginswith=1
>>> channel=1-15
>>> cicbeginswith=17
>>> channel=17-31
>>> sigchan=16
>>>
>>> cicbeginswith=32
>>> channel=32-62
>>>
>>> pointcode=100
>>> defaultdpc=90
>>> adjpointcode=90
>>>
>>> cicbeginswith=63
>>> channel=63-93
>>>
>>> cicbeginswith=94
>>> channel=94-107
>>> cicbeginswith=110
>>> channel=110-124
>>> sigchan=108
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>> _____________________________________________________________________
>>>
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
>>
>> --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>>
>>>
>>>
>>>
>>>
>>> -- BIPIN RAGHUVANSHI
>>> OPERATION HEAD
>>> ASTERISK (DEVELOPMENT AND RESEARCH)
>>> WWW.EHORIZONS.IN
>>> 011-32323262
>>> 011-46334633
>>>
>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>>
>>>
>>>
>>>
>>>
>>> --
>>> BIPIN RAGHUVANSHI
>>> OPERATION HEAD
>>> ASTERISK (DEVELOPMENT AND RESEARCH)
>>> WWW.EHORIZONS.IN
>>> 011-32323262
>>> 011-46334633
>>>
>>>
>>>
>>>
>>
>> --------------------------------------------------------------------------------
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
More information about the asterisk-ss7
mailing list