[asterisk-ss7] libss7 terminate digit
Germán I. Paul
gpaul at g-com.com.ar
Fri Nov 11 08:43:54 CST 2011
Hi.
Can someone of you tellme how can I add an N at the end of the dialed extension using libss7?
I`ve tried adding it on the dialplan, asterisk execute that OK, but when I debug the linkset, on called party signal it doesen`t appears.
I say, if I dial 02322674501, on the called party signal should appear 02322674501N.
I`m connected to a Siemens EWSD.
Thank you for your atention and sorry for my poor english
Regards
German
From: bipin singh
Sent: Wednesday, November 02, 2011 12:32 AM
To: asterisk-ss7 at lists.digium.com
Subject: Re: [asterisk-ss7] CIC isn't same of Telco
Hi,
In this case sigchan=16 on both ss7 link and working .
On Tue, Nov 1, 2011 at 6:11 PM, Rodrigo Ricardo Passos <rodrigopassos at gmail.com> wrote:
Hi bipin.
Thanks for your return.
The problem is because the cicbeginswith initialize with 32 and need to be 1 in range of 32 up to 62. The correlated CIC in the telco switch is 1 and not 32.
Em 01/11/2011 02:38, bipin singh escreveu:
Hi ,
Try This if your dahdi_tool show ok working on same APC and DCP,
[trunkgroups]
[channels]
group=1
context=outbound
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
faxdetect=both
callprogress=no
progzone=in
pulsedial=yes
;busydetect=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.5
txgain=0.5
callgroup=1
pickupgroup=1
signalling=ss7
ss7type=itu
linkset=1
networkindicator=national
pointcode=xxxxx
defaultdpc=xxxxx
group=1
adjpointcode=xxxx
mtp2=16
sigchan=16
cicbeginswith=1
channel=1-15
cicbeginswith=17
channel=17-31
group=2
cicbeginswith=32
channel=32-46,48-62
On Tue, Nov 1, 2011 at 4:43 AM, Rodrigo Ricardo Passos <rodrigopassos at gmail.com> wrote:
Hi all,
I have the following scenario:
The telco company uses 4 different Softswitchs to compose my SS7 interconnection, so 4 E1s to have redundancy. Each this one uses channels 1 up to 31. The map of the firsts is equal the ID of the asterisk channels, but the next ID´s isn't the same and the signaling doesn't work. The telco cannot change the CIC configuration to have the same CIC in my configuration. I have one TE405P. The only way to solve this problem is change the CIC in the telco company or i can change CIC maps in my asterisk box? Only the first E1 align with the first softswitch. When I a place a call using channel 64 of my third E1, telco doesn't have CIC 64, but have CIC 2 and the cannot be complete because the CIC isn't the same. What is the solution?
First E1: Asterisk: 1 - 31 (16 signaling) - Alcatel: S12_01 1-31 (16 signaling)
Second E1 Asterisk: 32 - 62 (no signaling - voice only) - Alcatel: S12_02 1 - 31
Third E1: Asterisk: 63 - 93 (no signaling - voice only) - NEC: NEAX_01 1 - 31
Fourth E1: Asterisk: 94 - 124 (16 signaling) - NEC: NEAX_02 1 - 31
All dpcs are different; each this one have an unique ID for each E1, only problem is the signaling.
My configurations are:
system.conf:
span=1,1,0,ccs,hdb3
# termtype: unknown
bchan=1-15,17-31
mtp2=16
# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS
span=2,1,0,ccs,hdb3
# termtype: unknown
bchan=32-62
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS
span=3,1,0,ccs,hdb3
# termtype: unknown
bchan=63-93
# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS
span=4,1,0,ccs,hdb3
# termtype: unknown
bchan=94-107,110-124
mtp2=108
# Global data
loadzone = us
defaultzone = us
chan_dahdi.conf:
[trunkgroups]
[channels]
context=interconexoes
ss7type=itu
signalling=ss7
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
networkindicator=national
echotraining=yes
echotraining=800
echocancel=yes
group=1
linkset=1
pointcode=100
defaultdpc=80
adjpointcode=80
cicbeginswith=1
channel=1-15
cicbeginswith=17
channel=17-31
sigchan=16
cicbeginswith=32
channel=32-62
pointcode=100
defaultdpc=90
adjpointcode=90
cicbeginswith=63
channel=63-93
cicbeginswith=94
channel=94-107
cicbeginswith=110
channel=110-124
sigchan=108
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)
WWW.EHORIZONS.IN
011-32323262
011-46334633
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)
WWW.EHORIZONS.IN
011-32323262
011-46334633
--------------------------------------------------------------------------------
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20111111/f794a88c/attachment.htm>
More information about the asterisk-ss7
mailing list