[asterisk-ss7] Digium PRI card with WARNING[8097]: l4isup.c:5069 l4isup_event: Received CIC=1 for unequipped circuit (typ=GRS), link 'l1'.

[toasterisk]

hello:
I install the Digium 2 port E1,asterisk-1.8, dahdi: Version: 2.5.0.2,
chan_ss7-2.1 version. the confi files are:
============system.conf======================
# Autogenerated by /usr/sbin/dahdi_genconf on Mon Dec  5 20:12:54 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS ClockSource
span=1,1,1,ccs,hdb3
# termtype: te
bchan=1-31
#dchan=16

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-62
#dchan=47

# Global data

loadzone        = cn
defaultzone     = cn

=ss7.conf===========
[linkset-siuc]

; The linkset is enabled
enabled => yes
; The end-of-pulsing (ST) is not used to determine when incoming address is
complete
enable_st => yes

; Reply incoming call with CON rather than ACM and ANM
use_connect => no

; The CIC hunting policy (even_mru, odd_lru, seq_lth, seq_htl) is even CIC
numbers, most recently used
hunting_policy => even_mru

; Incoming calls are placed in the ss7 context in the asterisk dialplan
context => ss7

; The language for this context is da
language => en

; The value and action for t35. Value is in msec, action is either st or
timeout
; If you use overlapped dialling dial plan, you might choose: t35 => 4000,st
t35 => 15000,timeout

; The subservice field: national (8), international (0), auto or
decimal/hex value
; The auto means that the subservice is obtained from first received SLTM
subservice => auto

; The host running the mtp3 service
; mtp3server => localhost
variant => CHINA

[link-l1]
sltm => no
; This link belongs to linkset siuc
linkset => siuc
; The speech/audio circuit channels on this link
channels => 1-15,17-31

; The signalling channel
schannel => remote,16
; To use the remote mtp3 service, use 'schannel => remote,16'

; The first CIC
firstcic => 1

; The link is enabled
enabled => yes

; Echo cancellation
; echocancel can be one of: no, 31speech (enable only when transmission
medium is 3.1Khz speech), allways
echocancel => no
=======================
the system always comes out the message:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20111205/4d0add46/attachment.htm>