[asterisk-ss7] libss7 configuration

[Basil Hweij]

Dear Sir,

 

It's the first time we use SS7 signaling, we have sangoma A104 card and we
want to use it for our new SS7 connection with telco.

Please I need help how I can apply libss7 parameters with one that telco
sent it as below:   

 

 

SS7/C7 PARAMETERS

Link 1 System #1 

            Span # = 1st E1

            Time Slot = 1

            Originating Point Code = 1081 (MSC1) NI=3

            Destination Point Code = 1056 (Audio telecom server) NI=3

            SLC = 0

            Link Type = F

Note: Point codes above are in decimal format.

****************************************************************************
***

ISUP SPECIFICATIONS  --> ITU

****************************************************************************
***

ISUP PARAMETERS:  Enter your CIC mapping into the following table or provide
additional sheets with this information.

CIC = 2-31

Span  # = 1st E1

Timeslot = 2-31

 

CIC = 33-63

Span  # = 2 nd E1

Timeslot = 1-31

 

CIC = 65-95

Span  # = 3rd E1

Timeslot = 1-31

 

CIC = 97-127

Span  # = 4th E1

Timeslot = 1-31

****************************************************************************
****

E1 configuration:

FRAMING = No Multi frame structure (E1 only)

LINE CODE = HDB3

SS7 = ITU SS7

SS7 link type = F link

 

 

And our libss7 configuration:

 

signaling=ss7                               ;this is ss7 signaling
ss7type=itu                                 ;using the ITU variant
ss7_called_nai=dynamic                 ;NAI for outgoing calls
ss7_calling_nai=dynamic                ;NAI for incoming calls
ss7_internationalprefix=00              ;international prefix value for
incoming calls
ss7_nationalprefix=0                      ;national prefix value for
incoming calls
ss7_subscriberprefix=                    ;subscriber prefix value for
incoming calls
ss7_unknownprefix=                      ;unknown prefix value for incoming
calls
ss7_explictacm=yes                      ;ACM is send as soon as call enters
the dial plan...may not accepted yet though
linkset=                                      ;arbitrary name for this set
of channels
pointcode=                                  ;the point code for this
system...aka SPC
adjpointcode=                              ;the point code for the system
that we are signaling to... aka APC
defaultdpc=                                 ;the point code for the system
that the CICs will be negotiated with...aka DPC
networkindicator=international         ;NI value for MTP3
cicbeginswith=                             ;the starting value of the CICs
channel=                                    ;the channels that are CICs
sigchan=                                     ;the signaling channel

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100526/a371fa3d/attachment-0001.htm