[asterisk-ss7] SS7 link setup between Telsis and Asterisk

[Deepika Nijhawan]

Hi Mesbah,

 

It can be possible. One thing, on Telsis trunk card which is connected to
this Asterisk server, I have enabled only first E1 and rest 7E1 are disabled
on both Telsis and Asterisk.

 

Even if I change cables from first card to second card, still 7E1s are
blocked and it can be possible that signaling cable is not on the first E1
on asterisk side.

 

So, do you recon I enable all 8E1's and configure them as SS7 with 16th
channel as dchan or shall I leave only 1E1 configured as its now.

 

 

 

---

 

Kind Regards,

 

Deepika Nijhawan

VoIP Engineer

 

Oxygen8 Communications 

T: +44(0) 871 434 9151

    +44(0) 121 620 9151

Email: deepika.nijhawan at oxygen8.com

Skype: deepika-nijhawan

W:  <http://www.oxygen8.com/> www.oxygen8.com                    

 

 

This communication contains information which is confidential and may also
be privileged. It is for the exclusive use of the intended recipient/s. If
you are not the intended recipient/s please note that any distribution,
copying or use of this communication or the information in it is strictly
prohibited. If you have received this communication in error please notify
us by email or by telephone (08082060808) and then delete the email and any
copies of it. This communication is from Oxygen8 Communications UK Ltd -
Company Number 03383285. Registered Address; 12th Floor, Lyndon House, 58-62
Hagley Road, Birmingham, B16 8PE. VAT Registration Number: 792 4494 89

     

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100518/932b1ac1/attachment-0001.htm