[asterisk-ss7] SS7 link setup between Telsis and Asterisk

[peterpet]

hi, disconnect your telco, connect loop cable to E1 port, and
look debug! 
OPC - this is your point code!


Deepika Nijhawan wrote:
>
> Hi,
>
>  
>
> Please find it below:
>
>  
>
> 1.
>
> asterisk4*CLI> dahdi show status
>
> Description                              Alarms  IRQ    bpviol CRC4   
> Fra Codi Options  LBO
>
> T4XXP (PCI) Card 0 Span 1                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 0 Span 2                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 0 Span 3                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 0 Span 4                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 1 Span 1                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 1 Span 2                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 1 Span 3                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
> T4XXP (PCI) Card 1 Span 4                OK      0      0      0      
> CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)
>
>  
>
> 2.
>
> asterisk4*CLI> ss7 set debug off linkset 1
>
> Enabled debugging on linkset 1
>
> asterisk4*CLI>
>
> Link state change: NOTALIGNED -> IDLE
>
> Link state change: IDLE -> NOTALIGNED
>
>  
>
> 3.
>
> Adjacent and default point codes are Telsis point codes and they are 
> correct. What do you mean by OPC ?
>
>  
>
> And this link was working before with ISDN setup correctly, so cabling 
> is correct.
>
>  
>
>  
>
>  
>
> ---
>
>  
>
> Kind Regards,
>
>  
>
> *Deepika Nijhawan*
>
> *VoIP Engineer*
>
> * *
>
> *Oxygen8* Communications
>
> *T:* +44(0) 871 434 9151
>
>     +44(0) 121 620 9151
>
> *Email:* deepika.nijhawan at oxygen8.com
>
> *Skype:* deepika-nijhawan
>
> *W:* www.oxygen8.com <http://www.oxygen8.com/>                   
>
>  
>
>  
>
> This communication contains information which is confidential and may 
> also be privileged. It is for the exclusive use of the intended 
> recipient/s. If you are not the intended recipient/s please note that 
> any distribution, copying or use of this communication or the 
> information in it is strictly prohibited. If you have received this 
> communication in error please notify us by email or by telephone 
> (08082060808) and then delete the email and any copies of it. This 
> communication is from Oxygen8 Communications UK Ltd - Company Number 
> 03383285. Registered Address; 12th Floor, Lyndon House, 58-62 Hagley 
> Road, Birmingham, B16 8PE. VAT Registration Number: 792 4494 89
>
>     
>
>  
>