[asterisk-ss7] chan_ss7 installation issue with sangoma card

[vallimamod abdullah]

On Monday8Feb, 2010, at 1:53 AM, vallimamod abdullah wrote:
>
> When looking at the dump, it looks like my ss7 box sends a GRS but  
> never gets an ack from the telco. On the other hand, the other side  
> sends an UBL for each circuit but the message is discarded while  
> waiting the GRS ack:
>
> [2010-02-08 01:45:53.635] WARNING[7380]: l4isup.c:2709  
> process_circuit_message: Reset still in progress for CIC=30,  
> typ=UBL, state=0, opc=3128, dpc=3255 message discarded.
> [2010-02-08 01:45:53.637] WARNING[7380]: l4isup.c:2709  
> process_circuit_message: Reset still in progress for CIC=29,  
> typ=UBL, state=0, opc=3128, dpc=3255 message discarded.
> [2010-02-08 01:46:16.925] NOTICE[7380]: l4isup.c:1334 t22_timeout:  
> T22 timeout (No "circuit group reset acknowledge" from peer) CIC=1.
>
> Is there a way to disable the group reset ?


Replying to myself, I finally found the origin of this problem: my  
point code was wrong :-(
I have finally managed to receive a call succesfully over my link !!

There is a last issue: When I am called over this link, the caller  
does not hear any ring tone. I have the following in the logs when I  
receive the sip ring message:

[2010-02-08 03:20:11.331]     -- SIP/officiob-085b46e8 is ringing
l4isup.c: SS7 indicate CIC=1.
l4isup.c: Sending ALERTING call progress for CIC=1 in-band ind=0.

I guess there is something to see with inband indicator... Any idea ?

Thank you !
- vma
.