[asterisk-ss7] chan_ss7 installation issue with sangoma card

[Wasim Baig]

On Mon, Feb 8, 2010 at 3:58 AM, vallimamod abdullah <
vallimamod.abdullah at imtelecom.fr> wrote:

> Thank you very much for your hint: I needed to disable all hardware
> stuff (echo cancellation, dtmf and fax detection.)
> I also needed to disable SLTM with sltm => no in ss7.conf
>
> Now my link is in service:
>

yay!


>
> *CLI> ss7 link status
> linkset ls1, link l1/1 INSERVICE, sls 0, total: 4702886453502279680,
> 4702886522221756416
>
> But I cannot send or receive calls and I have these error messages:
>
> [2010-02-07 23:54:21.932] WARNING[5279]: mtp.c:1443 process_msu: Got
> SLTM with unexpected sls=1, OPC=3128 DPC=3255 on 'l1/0' sls=0, state=5.
>

try sls=1, its wierd they are sending you sls=1 on the first link


> [2010-02-07 23:54:51.126] NOTICE[5279]: l4isup.c:1334 t22_timeout: T22
> timeout (No "circuit group reset acknowledge" from peer) CIC=3.
> [2010-02-07 23:55:03.340] WARNING[5279]: l4isup.c:4690 l4isup_event:
> Received CIC=1 for unequipped circuit (typ=UBL), link 'l1'.
> [2010-02-07 23:55:03.470] WARNING[5279]: l4isup.c:4690 l4isup_event:
> Received CIC=2 for unequipped circuit (typ=UBL), link 'l1'.
> [2010-02-07 23:55:03.472] WARNING[5279]: l4isup.c:2709
> process_circuit_message: Reset still in progress for CIC=5, typ=UBL,
> state=0 message discarded.
> [2010-02-07 23:55:03.474] WARNING[5279]: l4isup.c:2709
> process_circuit_message: Reset still in progress for CIC=4, typ=UBL,
> state=0 message discarded.
>
> Any hint for where I can look ?
>

i'd recommend you do an 'ss7 dump start /tmp/ss7dump.pcap'

and then wireshark that, and see if you're getting any responses on mtp3
from the telco

-- 
wasim h. baig | principal consultant | convergence pk | +92 300 8508070 |
peace be upon you ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100208/d08c0489/attachment.htm