[asterisk-ss7] chan_ss7 installation issue with sangoma card

[vallimamod abdullah]

Hello list,

I have a A104d sangoma card and I am trying to install chan_ss7 1.3  
with asterisk 1.6.0.6, wanpipe-3.4.6, dahdi-linux-2.1.0.4.
Following the guide from Daniel Pizarro (http://www.asterisk-peru.com/files/procedimiento_sangoma.txt 
), the compilation works fine, the link goes green and asterisk starts  
correctly.
But I can't get the ss7 link alignement with my provider; I have the  
following messages in my logs instead:

[2010-02-07 18:10:08.280] NOTICE[19620] mtp.c: Excessive poll delay  
7463!
[2010-02-07 18:10:10.992] DEBUG[19620] mtp.c: Suppressed 2726 bad  
frame debug log messages on link 'l1'
[2010-02-07 18:10:10.992] DEBUG[19620] mtp.c: MTP2 bitstream frame  
format error, entering octet counting mode on link 'l1'. Last raw  
bits': 1e 15 0a b3 90 72 91 03 03 cf 79 91
  bd 95 0f 18 47 95 d8 90 44 ed 02 33 05 92 bc 92 e2 19 1e 21 3f 95 e7  
55

Any hints on what may be wrong in my config ?

Thank you !

Regards,
- vma
.