[asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code

[Dave George]

The linkset is up but it seems as if the second D channel on slot 25 is not
aligning.  I am using 1 linkset and I am able to pass calls on both T1s.

 

I am getting the following error:

 

aislecomss72*CLI> ss7 debug linkset 1

Enabled debugging on linkset 1

 

Link state change: NOTALIGNED -> IDLE

Link state change: IDLE -> NOTALIGNED

 

aislecomss72*CLI> ss7 show linkset 1

SS7 linkset 1 status: Up

 

Is there a more detailed debug level that can tell me exactly why I am
getting this msg.

 

 

 

This is my system.conf

span=1,1,0,esf,b8zs

span=2,1,0,esf,b8zs

 

bchan=2-24

mtp2=1

 

bchan=26-48

mtp2=25

 

[channels]

context=in_dahdi

switchtype=dms100

 

usecallerid=yes

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=yes

echocancelwhenbridged=yes

 

signalling = ss7

 

ss7type = ansi

 

 

group=1

callgroup=1

pickupgroup=1

 

ss7_called_nai=dynamic

ss7_calling_nai=dynamic

ss7_internationalprefix = 00

ss7_nationalprefix = 0

 

 

 

; All settings apply to linkset 1

linkset = 1

context=in_dahdi

pointcode = 002-157-001

adjpointcode = 001-163-000

defaultdpc = 001-163-000

 

networkindicator=national

slc=0

cicbeginswith = 102

sigchan = 1

channel = 2-24

slc=1

cicbeginswith = 126

sigchan = 25

channel = 26-48

 

Thanks,

Dave 

 

 

 

From: asterisk-ss7-bounces at lists.digium.com
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of bipin singh
Sent: Friday, February 05, 2010 11:44 PM
To: asterisk-ss7 at lists.digium.com
Subject: Re: [asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code

 

you need 2 pointcode for two ss7 link.

On Fri, Feb 5, 2010 at 9:22 PM, Dave George <dgeorge at teletoneinc.com> wrote:

Hi,

I am using two T1 for SS7 on the same box.  Both T1s are using the same
point codes.  I have each T1 setup as its own linkset (Linkset 1 and linkset
2).

The second linkset is not coming up.

Is there any thing wrong with my config or setup?  Can I have both T1s usins
the same point code.  I did it this way so that if 1 T1 goes down the second
linkset and T1 stays up.

[trunkgroups]
[channels]

 context=in_dahdi

 switchtype=national

 usecallerid=yes
 callwaiting=yes
 usecallingpres=yes
 callwaitingcallerid=yes
 threewaycalling=yes
 transfer=yes
 canpark=yes
 cancallforward=yes
 callreturn=yes
 echocancel=yes
 echocancelwhenbridged=yes
 signalling = ss7
 ss7type = ansi





 group=1
 callgroup=1
 pickupgroup=1
 ss7_called_nai=dynamic
 ss7_calling_nai=dynamic
 ss7_internationalprefix = 00
 ss7_nationalprefix = 0

 ; All settings apply to linkset 1
 linkset = 1
 context=in_dahdi
 pointcode = 157
 adjpointcode = 163
 defaultdpc = 163
 networkindicator=national
 cicbeginswith = 102
 channel = 2-24
 sigchan = 1


 group = 2
 linkset = 2
 context=in_dahdi
 pointcode = 157
 adjpointcode = 163
 defaultdpc = 163
 networkindicator=national
 cicbeginswith = 126
 channel = 26-48
 sigchan = 25




Thanks,
Dave George
Teletone Inc.
561 674 3838





--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-ss7




-- 
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)  
WWW.EHORIZONS.IN
011-32323262

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100206/84481fa1/attachment-0001.htm