[asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code

[Paul Timmins]

Here's a slightly modified example from my systems

group=2
signalling=ss7
ss7type = ansi
networkindicator = national
cicbeginswith=73
adjpointcode = 005-000-032
pointcode = 005-000-033
defaultdpc = 005-000-032
linkset=1
slc=1
sigchan=96
echocancel=64
echocancelwhenbridged=yes
echotraining=yes
channel => 73-95
slc=2
sigchan=xx
echocancel=64
echocancelwhenbridged=yes
echotraining=yes
channel => xx-xx


Dave George wrote:
> Where do I set slc=0 and slc=1?
>
>
> Thanks,
> Dave George
> Teletone Inc.
> 561 674 3838
>
>
> -----Original Message-----
> From: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Paul Timmins
> Sent: Friday, February 05, 2010 11:17 AM
> To: asterisk-ss7 at lists.digium.com
> Subject: Re: [asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code
>
> You'll want to set up the same linkset, and use slc=0 and slc=1, the SLC 
> has to match what the remote end is using. This is of course assuming 
> you're connected using F links since the adjpointcode and defaultdpc are 
> the same as each other.
>
> Dave George wrote:
>   
>> Hi,
>>
>> I am using two T1 for SS7 on the same box.  Both T1s are using the same
>>     
> point codes.  I have each T1 setup as its own linkset (Linkset 1 and linkset
> 2).
>   
>> The second linkset is not coming up. 
>>
>> Is there any thing wrong with my config or setup?  Can I have both T1s
>>     
> usins the same point code.  I did it this way so that if 1 T1 goes down the
> second linkset and T1 stays up.
>   
>> [trunkgroups]
>> [channels]
>>  
>>  context=in_dahdi
>>   
>>  switchtype=national
>>  
>>  usecallerid=yes
>>  callwaiting=yes
>>  usecallingpres=yes
>>  callwaitingcallerid=yes
>>  threewaycalling=yes
>>  transfer=yes
>>  canpark=yes
>>   cancallforward=yes
>>   callreturn=yes
>>   echocancel=yes
>>   echocancelwhenbridged=yes
>>   signalling = ss7
>>   ss7type = ansi
>>  
>>   
>>  
>>   
>>  
>>  group=1
>>   callgroup=1
>>   pickupgroup=1
>>   ss7_called_nai=dynamic
>>   ss7_calling_nai=dynamic
>>   ss7_internationalprefix = 00
>>   ss7_nationalprefix = 0
>>   
>>  ; All settings apply to linkset 1
>>   linkset = 1
>>   context=in_dahdi
>>   pointcode = 157
>>   adjpointcode = 163
>>   defaultdpc = 163
>>   networkindicator=national
>>   cicbeginswith = 102
>>   channel = 2-24
>>   sigchan = 1
>>  
>>
>>  group = 2
>>  linkset = 2
>>  context=in_dahdi
>>  pointcode = 157
>>  adjpointcode = 163
>>  defaultdpc = 163
>>  networkindicator=national
>>  cicbeginswith = 126
>>  channel = 26-48
>>  sigchan = 25
>>
>>
>>
>>
>> Thanks,
>> Dave George
>> Teletone Inc.
>> 561 674 3838
>>
>>
>>
>>
>>   
>>     
>
>
>