[asterisk-ss7] SS7 2 T1s >>> 2 linksets same point code

[Dave George]

Hi,

I am using two T1 for SS7 on the same box.  Both T1s are using the same point codes.  I have each T1 setup as its own linkset (Linkset 1 and linkset 2).

The second linkset is not coming up. 

Is there any thing wrong with my config or setup?  Can I have both T1s usins the same point code.  I did it this way so that if 1 T1 goes down the second linkset and T1 stays up.

[trunkgroups]
[channels]
 
 context=in_dahdi
  
 switchtype=national
 
 usecallerid=yes
 callwaiting=yes
 usecallingpres=yes
 callwaitingcallerid=yes
 threewaycalling=yes
 transfer=yes
 canpark=yes
  cancallforward=yes
  callreturn=yes
  echocancel=yes
  echocancelwhenbridged=yes
  signalling = ss7
  ss7type = ansi
 
  
 
  
 
 group=1
  callgroup=1
  pickupgroup=1
  ss7_called_nai=dynamic
  ss7_calling_nai=dynamic
  ss7_internationalprefix = 00
  ss7_nationalprefix = 0
  
 ; All settings apply to linkset 1
  linkset = 1
  context=in_dahdi
  pointcode = 157
  adjpointcode = 163
  defaultdpc = 163
  networkindicator=national
  cicbeginswith = 102
  channel = 2-24
  sigchan = 1
 

 group = 2
 linkset = 2
 context=in_dahdi
 pointcode = 157
 adjpointcode = 163
 defaultdpc = 163
 networkindicator=national
 cicbeginswith = 126
 channel = 26-48
 sigchan = 25




Thanks,
Dave George
Teletone Inc.
561 674 3838