[asterisk-ss7] Issue with Interconnect

[Edrich de Lange]

Oh, Im using chan_ss7 now.

Those channels are up on my side though.(says idle)

Kind regards

On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange <edd at edd.za.net> wrote:
> Ok, its working fine.
>
> One problem, for some reason the last 8 cics dont come up on the
> remote side, and after a while Im getting these errors
>
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=59 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=56 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=60 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=62 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=63 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=61 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=58 for unequipped circuit (typ=RSC), link 'l1'.
> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received
> CIC=57 for unequipped circuit (typ=RSC), link 'l1'.
>
>
> Kind regards
>
> On Sat, Dec 11, 2010 at 8:01 AM, bipin singh <bipinraghuvanshi at gmail.com> wrote:
>> Hi
>>          Try it
>>
>> adjpointcode=1368
>>     defaultdpc=1368
>>
>> and also not set same acp dcp for two links .
>>
>> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange <edd at edd.za.net> wrote:
>>>
>>> Good day
>>>
>>> I have a setup using a 4 port Digium Card,Asterisk
>>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0
>>>
>>> My dahdi config looks like so :
>>>
>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4
>>> span=2,2,0,ccs,hdb3
>>> # termtype: te
>>> bchan=32-46,48-62
>>> mtp2=47
>>> #echocanceller=mg2,32-46,48-62
>>>
>>> (the other spans are disabled)
>>>
>>> [channels]
>>> signaling=ss7                    ;this is ss7 signaling
>>> ss7type=itu                       ;using the ITU variant
>>> ;ss7_called_nai=dynamic           ;NAI for outgoing calls
>>> ;ss7_calling_nai=dynamic          ;NAI for incoming calls
>>> ss7_internationalprefix= ;international prefix value for incoming calls
>>> ss7_nationalprefix=            ;national prefix value for incoming calls
>>> ss7_subscriberprefix=            ;subscriber prefix value for incoming
>>> calls
>>> ss7_unknownprefix=              ;unknown prefix value for incoming calls
>>> ss7_explicitacm=yes
>>> ss7_explictacm=yes
>>>
>>> group=1
>>> context=ss7
>>> linkset=1
>>> pointcode=720                      ;the point code for this system...aka
>>> SPC
>>> adjpointcode=1832                   ;the point code for the system
>>> that we are signaling to... aka APC
>>> defaultdpc=1368                     ;the point code for the system
>>> that the CICs will be negotiated with...aka DPC
>>> networkindicator=national_spare  ;NI value for MTP3
>>> cicbeginswith=32                  ;the starting value of the CICs
>>> channel=32-46
>>> cicbeginswith=48
>>> channel=48-62                    ;the channels that are CICs
>>> sigchan=47                      ;the signaling channel
>>>
>>> The Links come up. It seems fine.
>>> When I make a call to the link I get the following on the asterisk CLI
>>> Unhandled optional parameter 0x8 'Optional forward call indicator'
>>> [0x0 ]
>>> Unhandled optional parameter 0x31 'Propagation Delay Counter'
>>> [0x0 0x5a ]
>>> Unhandled optional parameter 0x3f 'Location Number'
>>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ]
>>> Unhandled optional parameter 0x39 'Parameter Compatibility Information'
>>> [0x31 0xd0 0x3f 0xc0 ]
>>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM
>>> on unconfigured CIC 6
>>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC
>>> on unconfigured CIC 6
>>>
>>> It doesnt seem to trigger even the extentions.
>>>
>>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im
>>> mistaken please assist, I would gladly try chan_ss7)
>>>
>>> I just need to get the incoming calls working urgently.
>>>
>>> Any assistance will be greatly appreciated.
>>>
>>> Kind regards
>>>
>>> Edrich de Lange
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>>
>>
>> --
>> BIPIN RAGHUVANSHI
>> OPERATION HEAD
>> ASTERISK (DEVELOPMENT AND RESEARCH)
>> WWW.EHORIZONS.IN
>> 011-32323262
>> 011-46334633
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>