[asterisk-ss7] Modify Screening parameter

[Pablo Molina]

 Hello Guys

I need modify *Screening*: parameter to value 3, right now i have *Screening
*: 0 , but i don´t know where i can modify. I have Asterisk 1.6.0.9 Dahdi
and Sangoma Card. The calls work really good but my provider can't pass the
CLI or ANI to the other side because need the *Screening* parameter on value
3 and I send on 0, here my chan_dahdi.conf

[channels]
signalling=ss7
ss7type=itu
;ss7_called_nai=unknown
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
context=from-pstn
;switchtype=euroisdn
usecallerid=yes
cidsignalling=dtmf
hidecallerid=no
restrictcid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no


linkset=1
networkindicator=national
;networkindicator=national_spare
pridialplan=international
pointcode = 9640
adjpointcode = 9270
defaultdpc = 9264
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090612/8616bd21/attachment.htm