[asterisk-ss7] Messages LIN, CBD, COO

Tue Jun 9 15:47:11 CDT 2009

Hi,

svn co https://observer.router.hu/repos_pub/libss7/trunk libss7
svn co https://observer.router.hu/repos_pub/chan_dahdi/trunk/ chan_dahdi

the chan_dahdi compile/tested with asterisk-1.6.0.9

here is one of the simplest configuration, the
changover/changback/ihibit features need at least 2 signalling links.
Also support TFP/TFA mtp3 messages too.
for proper operation is need to set up the mtp3/isup timer values too.
Added new channel variables like:
SS7_REDIRECT_INFO_REAS, SS7_REDIRECT_INFO_IND, SS7_ORIG_CALLED_NUM,
SS7_REDIRECTING_NUMBER, SS7_CUG_INTERLOCK_CODE, SS7_CUG_INTERLOCK_NI
etc...
Added incomming SAM (overlap dial) support, 
proper support priindication = outofband
improved cli commands, ability to remove/add cics to linkset without
restart chan_dahdi, and many more features :)

;#################################################################
; UPC TELECOM

context = from-upctelecom-ss7
amaflags=billing
accountcode=provider-upctelecom-ss7bp
signalling = ss7
ss7type = itu

ss7_called_nai=dynamic
ss7_calling_nai=dynamic

ss7_internationalprefix=00
ss7_nationalprefix=06
ss7_networkroutedprefix=0P
ss7_subscriberprefix=0S
ss7_unknownprefix=0U
linkset = 1
language=hu
ss7_explicitacm=yes
ss7_autoacm=yes
ss7_use_echocontrol=yes
ss7_default_echocontrol=1

pointcode = 1344  
adjpointcode = 449
defaultdpc = 449

networkindicator=national_spare
sigchan = 1
mtp3_timer.q707_t1 = 4000 
mtp3_timer.q707_t2 = 30000

mtp3_timer.t1 = 500
mtp3_timer.t2 = 700
mtp3_timer.t3 = 500
mtp3_timer.t4 = 500
mtp3_timer.t5 = 500
mtp3_timer.t6 = 500

mtp3_timer.t10 = 60000
mtp3_timer.t12 = 800
mtp3_timer.t13 = 800 
mtp3_timer.t14 = 2000 
mtp3_timer.t19 = 67000
mtp3_timer.t21 = 63000

mtp3_timer.t22 = 300000   
mtp3_timer.t23 = 300000

isup_timer.t1 = 30000 
isup_timer.t2 = 180000
isup_timer.t5 = 300000
isup_timer.t6 = 90000
isup_timer.t7 = 20000

isup_timer.t8 = 10000

isup_timer.t12 = 15000 
isup_timer.t13 = 300000
isup_timer.t14 = 15000 
isup_timer.t15 = 300000

isup_timer.t16 = 15000 
isup_timer.t17 = 300000
isup_timer.t18 = 15000 
isup_timer.t19 = 300000
isup_timer.t20 = 15000
isup_timer.t21 = 300000

isup_timer.t22 = 15000
isup_timer.t23 = 300000

isup_timer.t27 = 240000

isup_timer.t33 = 12000 
isup_timer.t35 = 15000 
isup_timer.digittimeout = 5000

inr_if_no_calling = yes
ss7_initialhwblo = no
non_isdn_access = yes  

group = 2
cicbeginswith = 2
channel = 2-31

;2nd E1
cicbeginswith = 33
channel = 32-62

;3rd E1
cicbeginswith = 65
channel = 63-93

;4th E1
cicbeginswith = 97
channel = 94-124

On Tue, 2009-06-09 at 15:10 -0400, Ruddy Gbaguidi wrote:
> How do we download it ?
> 
> -----Original Message-----
> From: asterisk-ss7-bounces at lists.digium.com [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Domjan Attila
> Sent: June-09-09 2:07 PM
> To: Ing. Juan G. Dominguez; asterisk-ss7 at lists.digium.com
> Subject: Re: [asterisk-ss7] Messages LIN, CBD, COO
> 
> The libss-1.0.x doesn't suport it, my version in my svn does.
> 
> Regards
> 
> Attila
> 
> 
> On Tue, 2009-06-09 at 13:54 -0300, Ing. Juan G. Dominguez wrote:
> > Hello...
> > 
> > Someone can tell me what happened with the messages LIN, CBD and COO.
> > Not in the library not?
> > 
> > Thanks...
> > 
> > ----- Original Message -----
> > From: "Alejandro Mejía Evertsz" <amejia at carmeltelecom.com>
> > To: <asterisk-ss7 at lists.digium.com>
> > Sent: Tuesday, June 09, 2009 12:22 PM
> > Subject: Re: [asterisk-ss7] USING TIMESLOT OTHER THAN 16 FOR 
> > SIGNALLING
> > 
> > 
> > > I'm just a newbie, but I guess it's completely possible to use ts1 
> > > for signaling like this:
> > >
> > > ====system.conf====
> > > span=1,0,0,ccs,hdb3
> > > bchan=2-31
> > > dchan=1
> > >
> > > ===chan_dahdi.conf====
> > > signalling=ss7
> > > ss7type=itu
> > > ..blah blah
> > > ..blah blah
> > > sigchan = 1
> > > channel => 2-31
> > >
> > > Good luck!
> > >
> > > Alex
> > >
> > > -----Mensaje original-----
> > > De: asterisk-ss7-bounces at lists.digium.com
> > > [mailto:asterisk-ss7-bounces at lists.digium.com] En nombre de 
> > > research at businesstz.com Enviado el: Martes, 09 de Junio de 2009 
> > > 01:56 a.m.
> > > Para: asterisk-ss7 at lists.digium.com
> > > Asunto: [asterisk-ss7] USING TIMESLOT OTHER THAN 16 FOR SIGNALLING
> > >
> > > Hi Team
> > >
> > > May you please advice if i can configure asterisk to use timeslot 1 
> > > for signaling! I want to connect to a telko but they want me to use 
> > > ts1. Can you be so kind to post system.conf and chan_dahdi.conf
> > >
> > > Kind regards
> > > Sam
> > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > 
> > 
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> > 
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090609/2214945f/attachment.pgp 