[asterisk-ss7] Link Not Aligned
bipin singh
bipinraghuvanshi at gmail.com
Sun Dec 20 22:30:31 CST 2009
Hi
i have configure 4 ss7 link in single asterisk box.
On Mon, Dec 21, 2009 at 1:46 AM, Vashkar <vashkar at gmail.com> wrote:
> are you having two C7 configured ? I mean on ts 16 and ts 47 ?
>
>
> On Fri, Dec 18, 2009 at 10:52 AM, bipin singh <bipinraghuvanshi at gmail.com>wrote:
>
>> hi
>> your sustem.conf is wrong
>> span=1,1,0,ccs,hdb3,crc4
>> # termtype: te
>> bchan=1-15,17-31
>> dchan=16
>> try this
>>
>>
>> On Wed, Dec 16, 2009 at 11:07 AM, Junaid Saeed Uppal <
>> junaid.uppal at gmail.com> wrote:
>>
>>> Hi All / Wolfgang,
>>>
>>> Both of the links came up [ configuration change to CRC4 on both sides
>>> and i changed the TDMV_DCHAN to 0 as you recommended.
>>>
>>> Thanks a lot for your support.
>>>
>>> Rgds,
>>> Junaid
>>>
>>> On Wed, Dec 16, 2009 at 8:55 AM, Wolfgang Pichler <wpichler at yosd.at>wrote:
>>>
>>>> Hi,
>>>>
>>>> i am not an expret here - but have you triied to set
>>>>
>>>> TDMV_DCHAN = 0
>>>>
>>>> instead of commenting it out ?
>>>>
>>>> Maybe it takes a default value if commented out...
>>>>
>>>> best regards,
>>>> Wolfgang
>>>>
>>>> 2009/12/15 Junaid Saeed Uppal <junaid.uppal at gmail.com>
>>>>
>>>>> Hi Guys,
>>>>>
>>>>> This is the first time , I am posting , but have been reading the list
>>>>> quietly for a while.
>>>>>
>>>>> I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot
>>>>> get the link to align at all, The far end switch is Siemens GSM [ SR 13 ]
>>>>> switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe ,
>>>>> BCR
>>>>>
>>>>> [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256
>>>>> Starting link 1
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Len = 4 [ ff ff 01 00 ]
>>>>> FSN: 127 FIB 1
>>>>> BSN: 127 BIB 1
>>>>> >[0] LSSU SIO
>>>>>
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>> Link state change: NOTALIGNED -> IDLE
>>>>> Link state change: IDLE -> NOTALIGNED
>>>>>
>>>>>
>>>>>
>>>>> [root at in-tickets libss7]# wanrouter hwprobe
>>>>> -------------------------------
>>>>> | Wanpipe Hardware Probe Info |
>>>>> -------------------------------
>>>>> 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 :
>>>>> V=33
>>>>> 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 :
>>>>> V=33
>>>>>
>>>>> Card Cnt: A101-2=1
>>>>>
>>>>> I am using the following version of the software
>>>>>
>>>>> 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09
>>>>> Nov 2009) $
>>>>> 2. LibSS7 - trunk
>>>>> 3. Asterisk - 1.6.2
>>>>> 4. Centos 5.3
>>>>> 5. 2.6.18-128 Kernel
>>>>>
>>>>> Everything compiles fine and i am able to load dahdi , but the SS7 link
>>>>> is never aligned and the status is always down
>>>>>
>>>>> /etc/dahdi/system.conf
>>>>> ---------------------------------
>>>>>
>>>>> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
>>>>> #autogenrated on 2009-12-16
>>>>> #Dahdi Channels Configurations
>>>>> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak
>>>>> loadzone=us
>>>>> defaultzone=us
>>>>>
>>>>> #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1>
>>>>> span=1,0,0,ccs,hdb3
>>>>> bchan=1-15,17-31
>>>>> mtp2=16
>>>>> #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2>
>>>>> span=2,0,0,ccs,hdb3
>>>>> bchan=32-46,48-62
>>>>> mtp2=47
>>>>>
>>>>> /etc/wanpipe/wanpipe1.conf
>>>>> ---------------------------------------
>>>>>
>>>>> [devices]
>>>>> wanpipe1 = WAN_AFT_TE1, Comment
>>>>>
>>>>> [interfaces]
>>>>> w1g1 = wanpipe1, , TDM_VOICE, Comment
>>>>>
>>>>> [wanpipe1]
>>>>> CARD_TYPE = AFT
>>>>> S514CPU = A
>>>>> CommPort = PRI
>>>>> AUTO_PCISLOT = NO
>>>>> PCISLOT = 14
>>>>> PCIBUS = 0
>>>>> FE_MEDIA = E1
>>>>> FE_LCODE = HDB3
>>>>> FE_FRAME = NCRC4
>>>>> FE_LINE = 1
>>>>> TE_CLOCK = NORMAL
>>>>> TE_REF_CLOCK = 0
>>>>> TE_SIG_MODE = CCS
>>>>> TE_HIGHIMPEDANCE = NO
>>>>> LBO = 120OH
>>>>> FE_TXTRISTATE = NO
>>>>> MTU = 1500
>>>>> UDPPORT = 9000
>>>>> TTL = 255
>>>>> IGNORE_FRONT_END = NO
>>>>> TDMV_SPAN = 1
>>>>> #TDMV_DCHAN = 16
>>>>> #TDMV_HW_DTMF = YES
>>>>> #TDMV_HW_FAX_DETECT = NO
>>>>>
>>>>> [w1g1]
>>>>> ACTIVE_CH = ALL
>>>>> TDMV_HWEC = NO
>>>>>
>>>>>
>>>>> /etc/wanpipe/wanpipe2.conf
>>>>> ---------------------------------------
>>>>>
>>>>> [devices]
>>>>> wanpipe2 = WAN_AFT_TE1, Comment
>>>>>
>>>>> [interfaces]
>>>>> w2g1 = wanpipe2, , TDM_VOICE, Comment
>>>>>
>>>>> [wanpipe2]
>>>>> CARD_TYPE = AFT
>>>>> S514CPU = A
>>>>> CommPort = PRI
>>>>> AUTO_PCISLOT = NO
>>>>> PCISLOT = 14
>>>>> PCIBUS = 0
>>>>> FE_MEDIA = E1
>>>>> FE_LCODE = HDB3
>>>>> FE_FRAME = NCRC4
>>>>> FE_LINE = 2
>>>>> TE_CLOCK = NORMAL
>>>>> TE_REF_CLOCK = 0
>>>>> TE_SIG_MODE = CCS
>>>>> TE_HIGHIMPEDANCE = NO
>>>>> LBO = 120OH
>>>>> FE_TXTRISTATE = NO
>>>>> MTU = 1500
>>>>> UDPPORT = 9000
>>>>> TTL = 255
>>>>> IGNORE_FRONT_END = NO
>>>>> TDMV_SPAN = 2
>>>>> #TDMV_DCHAN = 16
>>>>> #TDMV_HW_DTMF = YES
>>>>> #TDMV_HW_FAX_DETECT = NO
>>>>>
>>>>> [w2g1]
>>>>> ACTIVE_CH = ALL
>>>>> TDMV_HWEC = NO
>>>>>
>>>>> /etc/asterisk/chan_dahdi.conf
>>>>> -------------------------------------------
>>>>>
>>>>> [trunkgroups]
>>>>>
>>>>> [channels]
>>>>> context=default
>>>>> usecallerid=yes
>>>>> hidecallerid=no
>>>>> callwaiting=yes
>>>>> usecallingpres=yes
>>>>> callwaitingcallerid=yes
>>>>> threewaycalling=yes
>>>>> transfer=yes
>>>>> canpark=yes
>>>>> cancallforward=yes
>>>>> callreturn=yes
>>>>> echocancel=yes
>>>>> echocancelwhenbridged=yes
>>>>> relaxdtmf=yes
>>>>> rxgain=0.0
>>>>> txgain=0.0
>>>>> group=1
>>>>> callgroup=1
>>>>> pickupgroup=1
>>>>> immediate=no
>>>>>
>>>>> ss7type=itu
>>>>> signalling=ss7
>>>>> ss7_called_nai=national
>>>>> ss7_calling_nai=national
>>>>> networkindicator=national_spare
>>>>> linkset=1
>>>>> pointcode=2259
>>>>> defaultdpc=2256
>>>>> adjpointcode=2256
>>>>> cicbeginswith=1
>>>>> group=0
>>>>> channel =>1-15,17-31
>>>>> sigchan=16
>>>>>
>>>>> ss7type=itu
>>>>> signalling=ss7
>>>>> ss7_called_nai=national
>>>>> ss7_calling_nai=national
>>>>> networkindicator=national_spare
>>>>> linkset=2
>>>>> pointcode=2260
>>>>> defaultdpc=2256
>>>>> adjpointcode=2256
>>>>> sigchan=47
>>>>> cicbeginswith=32
>>>>> group=0
>>>>> channel =>32-46,48-62
>>>>>
>>>>>
>>>>> [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta
>>>>>
>>>>> ***** w1g1: E1 Alarms (Framer) *****
>>>>>
>>>>> ALOS: OFF | LOS: OFF
>>>>> RED: OFF | AIS: OFF
>>>>> LOF: OFF | RAI: OFF
>>>>>
>>>>> ***** w1g1: E1 Alarms (LIU) *****
>>>>>
>>>>> Short Circuit: OFF
>>>>> Open Circuit: OFF
>>>>> Loss of Signal: OFF
>>>>>
>>>>>
>>>>> ***** w1g1: E1 Performance Monitoring Counters *****
>>>>>
>>>>> Line Code Violation : 0
>>>>> Far End Block Errors : 0
>>>>> CRC4 Errors : 0
>>>>> FAS Errors : 0
>>>>>
>>>>>
>>>>> Rx Level : > -2.5db
>>>>>
>>>>>
>>>>> [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta
>>>>>
>>>>> ***** w2g1: E1 Alarms (Framer) *****
>>>>>
>>>>> ALOS: OFF | LOS: OFF
>>>>> RED: OFF | AIS: OFF
>>>>> LOF: OFF | RAI: OFF
>>>>>
>>>>> ***** w2g1: E1 Alarms (LIU) *****
>>>>>
>>>>> Short Circuit: OFF
>>>>> Open Circuit: OFF
>>>>> Loss of Signal: OFF
>>>>>
>>>>>
>>>>> ***** w2g1: E1 Performance Monitoring Counters *****
>>>>>
>>>>> Line Code Violation : 0
>>>>> Far End Block Errors : 0
>>>>> CRC4 Errors : 0
>>>>> FAS Errors : 0
>>>>>
>>>>>
>>>>> Rx Level : > -2.5db
>>>>>
>>>>> Kindly help me out.
>>>>>
>>>>> Best Regards,
>>>>> Junaid
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-ss7 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>
>>
>>
>>
>> --
>> BIPIN RAGHUVANSHI
>> OPERATION HEAD
>> ASTERISK (DEVELOPMENT AND RESEARCH)
>> WWW.EHORIZONS.IN <http://www.ehorizons.in/>
>> 011-32323262
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
--
BIPIN RAGHUVANSHI
OPERATION HEAD
ASTERISK (DEVELOPMENT AND RESEARCH)
WWW.EHORIZONS.IN
011-32323262
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091221/a53beffc/attachment-0001.htm
More information about the asterisk-ss7
mailing list