[asterisk-ss7] Link Not Aligned
Wolfgang Pichler
wpichler at yosd.at
Tue Dec 15 22:25:00 CST 2009
Hi,
i am not an expret here - but have you triied to set
TDMV_DCHAN = 0
instead of commenting it out ?
Maybe it takes a default value if commented out...
best regards,
Wolfgang
2009/12/15 Junaid Saeed Uppal <junaid.uppal at gmail.com>
> Hi Guys,
>
> This is the first time , I am posting , but have been reading the list
> quietly for a while.
>
> I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot get
> the link to align at all, The far end switch is Siemens GSM [ SR 13 ]
> switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe ,
> BCR
>
> [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256
> Starting link 1
> Link state change: IDLE -> NOTALIGNED
> Len = 4 [ ff ff 01 00 ]
> FSN: 127 FIB 1
> BSN: 127 BIB 1
> >[0] LSSU SIO
>
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
> Link state change: NOTALIGNED -> IDLE
> Link state change: IDLE -> NOTALIGNED
>
>
>
> [root at in-tickets libss7]# wanrouter hwprobe
> -------------------------------
> | Wanpipe Hardware Probe Info |
> -------------------------------
> 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 :
> V=33
> 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 :
> V=33
>
> Card Cnt: A101-2=1
>
> I am using the following version of the software
>
> 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09 Nov
> 2009) $
> 2. LibSS7 - trunk
> 3. Asterisk - 1.6.2
> 4. Centos 5.3
> 5. 2.6.18-128 Kernel
>
> Everything compiles fine and i am able to load dahdi , but the SS7 link is
> never aligned and the status is always down
>
> /etc/dahdi/system.conf
> ---------------------------------
>
> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
> #autogenrated on 2009-12-16
> #Dahdi Channels Configurations
> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak
> loadzone=us
> defaultzone=us
>
> #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1>
> span=1,0,0,ccs,hdb3
> bchan=1-15,17-31
> mtp2=16
> #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2>
> span=2,0,0,ccs,hdb3
> bchan=32-46,48-62
> mtp2=47
>
> /etc/wanpipe/wanpipe1.conf
> ---------------------------------------
>
> [devices]
> wanpipe1 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w1g1 = wanpipe1, , TDM_VOICE, Comment
>
> [wanpipe1]
> CARD_TYPE = AFT
> S514CPU = A
> CommPort = PRI
> AUTO_PCISLOT = NO
> PCISLOT = 14
> PCIBUS = 0
> FE_MEDIA = E1
> FE_LCODE = HDB3
> FE_FRAME = NCRC4
> FE_LINE = 1
> TE_CLOCK = NORMAL
> TE_REF_CLOCK = 0
> TE_SIG_MODE = CCS
> TE_HIGHIMPEDANCE = NO
> LBO = 120OH
> FE_TXTRISTATE = NO
> MTU = 1500
> UDPPORT = 9000
> TTL = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN = 1
> #TDMV_DCHAN = 16
> #TDMV_HW_DTMF = YES
> #TDMV_HW_FAX_DETECT = NO
>
> [w1g1]
> ACTIVE_CH = ALL
> TDMV_HWEC = NO
>
>
> /etc/wanpipe/wanpipe2.conf
> ---------------------------------------
>
> [devices]
> wanpipe2 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w2g1 = wanpipe2, , TDM_VOICE, Comment
>
> [wanpipe2]
> CARD_TYPE = AFT
> S514CPU = A
> CommPort = PRI
> AUTO_PCISLOT = NO
> PCISLOT = 14
> PCIBUS = 0
> FE_MEDIA = E1
> FE_LCODE = HDB3
> FE_FRAME = NCRC4
> FE_LINE = 2
> TE_CLOCK = NORMAL
> TE_REF_CLOCK = 0
> TE_SIG_MODE = CCS
> TE_HIGHIMPEDANCE = NO
> LBO = 120OH
> FE_TXTRISTATE = NO
> MTU = 1500
> UDPPORT = 9000
> TTL = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN = 2
> #TDMV_DCHAN = 16
> #TDMV_HW_DTMF = YES
> #TDMV_HW_FAX_DETECT = NO
>
> [w2g1]
> ACTIVE_CH = ALL
> TDMV_HWEC = NO
>
> /etc/asterisk/chan_dahdi.conf
> -------------------------------------------
>
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
>
> ss7type=itu
> signalling=ss7
> ss7_called_nai=national
> ss7_calling_nai=national
> networkindicator=national_spare
> linkset=1
> pointcode=2259
> defaultdpc=2256
> adjpointcode=2256
> cicbeginswith=1
> group=0
> channel =>1-15,17-31
> sigchan=16
>
> ss7type=itu
> signalling=ss7
> ss7_called_nai=national
> ss7_calling_nai=national
> networkindicator=national_spare
> linkset=2
> pointcode=2260
> defaultdpc=2256
> adjpointcode=2256
> sigchan=47
> cicbeginswith=32
> group=0
> channel =>32-46,48-62
>
>
> [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta
>
> ***** w1g1: E1 Alarms (Framer) *****
>
> ALOS: OFF | LOS: OFF
> RED: OFF | AIS: OFF
> LOF: OFF | RAI: OFF
>
> ***** w1g1: E1 Alarms (LIU) *****
>
> Short Circuit: OFF
> Open Circuit: OFF
> Loss of Signal: OFF
>
>
> ***** w1g1: E1 Performance Monitoring Counters *****
>
> Line Code Violation : 0
> Far End Block Errors : 0
> CRC4 Errors : 0
> FAS Errors : 0
>
>
> Rx Level : > -2.5db
>
>
> [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta
>
> ***** w2g1: E1 Alarms (Framer) *****
>
> ALOS: OFF | LOS: OFF
> RED: OFF | AIS: OFF
> LOF: OFF | RAI: OFF
>
> ***** w2g1: E1 Alarms (LIU) *****
>
> Short Circuit: OFF
> Open Circuit: OFF
> Loss of Signal: OFF
>
>
> ***** w2g1: E1 Performance Monitoring Counters *****
>
> Line Code Violation : 0
> Far End Block Errors : 0
> CRC4 Errors : 0
> FAS Errors : 0
>
>
> Rx Level : > -2.5db
>
> Kindly help me out.
>
> Best Regards,
> Junaid
>
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091216/c19135fa/attachment.htm
More information about the asterisk-ss7
mailing list