[asterisk-ss7] chan_dahdi not loading, device or ressource is busy...
Wolfgang Pichler
wpichler at yosd.at
Mon Dec 7 17:56:14 CST 2009
Hi all,
i am trying to setup asterisk with chan_dahdi ss7 support on the latest
trixbox...
I do have no digium cards in the box - using sangoma cards - the wanpipe
modules are already loaded and working...
When i try to load chan_dahdi.so - then the module does not get loaded - and
i will get an error message "chan_dahdi.c: Unable to open SS7 sigchan 16
(Device or resource busy)"
i do have the following configs
wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 6
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 430
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
TDMV_HW_FAX_DETECT = NO
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = NO
MTU = 8
dahdi/system.conf
span=1,1,0,ccs,hdb3
mtp2=16
bchan=1-15
bchan=17-31
chan_dahdi.conf
[channels]
signalling = ss7
ss7type = itu
linkset = 1
pointcode = 9100
adjpointcode = 993
defaultdpc = 993
sigchan = 16
cicbeginswith = 1
ss7_called_nai=dynamic
ss7_calling_nai=dynamic
ss7_internationalprefix = 00
ss7_nationalprefix = 0
ss7_subscriberprefix =
ss7_unknownprefix =
networkindicator=international
channel=1-15
channel=17-31
I have already tried all possible combinations of not specifiying dchan on
wanpipe - only later, and so on - no luck with it...
Anyone here who knows what could get wrong ?
best regards,
Wolfgang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091208/e8d57e14/attachment.htm
More information about the asterisk-ss7
mailing list