[asterisk-ss7] Configuring Sangoma A102 card with Asterisk + libss7

Amit Bhayani amit.bhayani at gmail.com
Sat Apr 25 01:04:01 CDT 2009


Thanks guys for reverting.

So use either zaptel or dahdi, right?

I have already installed lipri, libss7, zaptel and asterisk + wanpipe.
Installation is smooth. However how do I know everything is working? I have
set E1 in zaptel.conf

I don't have live E1 line, but want to test if SS7 is working.

On Sangoma hardware I have insetred loop-back cable and I see green light
glowing. So I believe the card is ok.

Also when I log in to Asterisk CLI and call 'module show' I don't see ss7.
If I try to execute ss7 command it says command not found. Does it mean ss7
module is not lodade?

in /etc/lib/Asterisk/modules I dont see chan_dahdi.so which I think is
obvious as I don't have dahdi yet.

Thanks for your help.


On Sat, Apr 25, 2009 at 11:06 AM, Alex Balashov
<abalashov at evaristesys.com>wrote:

> DAHDI is the new iteration of Asterisk's general hardware support layer.
>
> It is for all hardware natively supported by Asterisk, not just Digium.
>
> Amit Bhayani wrote:
>
> > Hi Attila,
> >
> > Thanks for your response. I guess that means I will have to install
> > dahdi module too. But I am using Sangoma Card and AFAIK dahdi is for
> > Digium card. Can you please shed some light on this?
> >
> > Sorry if this is naive question. I am bit new to Asterisk / SS7 and
> > hence trying to form the relation between all modules.
> >
> > Thanks
> > Amit.
> >
> > On Sat, Apr 25, 2009 at 3:01 AM, Domjan Attila <adomjan at tvnet.hu
> > <mailto:adomjan at tvnet.hu>> wrote:
> >
> >     Hi,
> >
> >     chan_zap.so is replaced to chan_dahdi.so
> >
> >     Attila
> >
> >
> >     On Fri, 2009-04-24 at 23:57 +0530, Amit Bhayani wrote:
> >      > Hi Guys,
> >      >
> >      > I am trying to configure the Asterisk + Libss7. I have
> successfully
> >      > installed libss7 and asterisk, still I don't see chan_zap.so
> >      > in /usr/lib/asterisk/modules. Asterisk is 1.6.x and libss7 is from
> >      > trunk. What am I missing?
> >      >
> >      > Any help is highly appreciated.
> >      >
> >      >
> >      > Thanks,
> >      > Amit.
> >      > http://amitbhayani.blogspot.com/
> >      > _______________________________________________
> >      > --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
> >      >
> >      > asterisk-ss7 mailing list
> >      > To UNSUBSCRIBE or update options visit:
> >      >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >     _______________________________________________
> >     --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> >     asterisk-ss7 mailing list
> >     To UNSUBSCRIBE or update options visit:
> >       http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> --
> Alex Balashov
> Evariste Systems
> Web    : http://www.evaristesys.com/
> Tel    : (+1) (678) 954-0670
> Direct : (+1) (678) 954-0671
> Mobile : (+1) (678) 237-1775
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090425/05efdca6/attachment-0001.htm 


More information about the asterisk-ss7 mailing list