[asterisk-ss7] an ss7 configuration question

[Markus A. Wipfler]

You said it yourself, you need to remove the second linkset from your  
zapata.conf. You can define the other defaultdpc before its signaling  
channel.

--
Markus


On Sep 1, 2008, at 2:00 PM, Attila Domjan wrote:

> Hi,
> Is possible to set up the following example with libss7?
>
>
>                    TELCO
>
>                   STP1(pc:2)----- SW1(pc:4)
>                  /   |      \   /
>                 /    |       \ /
> my aserisk(pc:1)      |        \
>                 \    |       / \
>                  \   |      /   \
>                   STP2(pc:3)----- SW2(pc:5)
>
>
> my configuration should be like:
>
> linkset = 1
> pointcode = 1
>
> adjpointcode = 2
> defaultdpc = 4
> cicbeginswith = 1
> networkindicator = national_spare
> sigchan = 16
>
> adjpointcode = 3
> defaultdpc = 4
> sigchan = 48
>
> channel = 1-15
> channel = 17-31
>
>
> linkset = 2
> pointcode = 1
>
> adjpointcode = 2
> defaultdpc = 5
> cicbeginswith = 1
> networkindicator = national_spare
> sigchan = 16
>
> adjpointcode = 3
> defaultdpc = 5
> sigchan = 47
>
> channel = 32-46
> channel = 48-62
>
> but the current implementation don't allow using the same signalling
> channel in 2 linksets.
> Any idea?
>
> Regards,
> Attila
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7