[asterisk-ss7] asterisk-ss7 Digest, Vol 44, Issue 20

Tue Oct 28 06:45:35 CDT 2008

ss7.conf

[linkset-1]
enabled => yes
use_connect => no
enable_st => yes
hunting_policy => even_mru
subservice => auto
context => default

[link-l1]
linkset => 1
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes

[host-localhostname]
enabled => yes
opc=>0x8e0
dpc=>1:0x3fff
links => l1:1

wanpip1.con
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 1
PCIBUS          = 3
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = NCRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_SIG_MODE     = CCS
TE_HIGHIMPEDANCE        = NO
LBO             = 120OH
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = NO
TDMV_HW_DTMF    = NO

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = NO

On Tue, Oct 28, 2008 at 1:00 AM, <asterisk-ss7-request at lists.digium.com>wrote:

> Send asterisk-ss7 mailing list submissions to
>        asterisk-ss7 at lists.digium.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.digium.com/mailman/listinfo/asterisk-ss7
> or, via email, send a message with subject or body 'help' to
>        asterisk-ss7-request at lists.digium.com
>
> You can reach the person managing the list at
>        asterisk-ss7-owner at lists.digium.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of asterisk-ss7 digest..."
>
>
> Today's Topics:
>
>   1. Initial Alignment Failure on asterisk+ss7 setup (Ifeoluwa Oyeneye)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 27 Oct 2008 14:11:34 +0000 (GMT)
> From: Ifeoluwa Oyeneye <ifeoyeneye at yahoo.co.uk>
> Subject: [asterisk-ss7] Initial Alignment Failure on asterisk+ss7
>        setup
> To: asterisk-ss7 at lists.digium.com
> Message-ID: <201849.756.qm at web28414.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi folks,
> I'm new to asterisk-ss7.I'm having problem connecting an asterisk box to a
> ss7 link. I'm making use of chan_ss7-1.0.0 with? a sangoma A104 card.
> Here is my configuration:
> ???
> /etc/asterisk/ss7.conf:
> [linkset-suic]
> enabled => yes
> use_connect => no
> enable_st => yes
> hunting_policy => even_mru
> subservice => auto
> context => default
>
> [link-l1]
> linkset => suic
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> enabled => yes
>
> [link-l2]
> linkset => suic
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => no
>
> [link-l3]
> linkset => suic
> channels => 1-31
> schannel =>
> firstcic => 65
> enabled => no
>
> [link-l4]
> linkset => suic
> channels => 1-31
> schannel =>
> firstcic => 97
> enabled => no
>
> [host-ast]
> enabled => yes
> opc => 123
> dpc => suic:98
> links => l1:1
>
> /etc/wanpipe/wanpipe1.conf:
> [devices]
> wanpipe1 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w1g1 = wanpipe1, , TDM_VOICE, Comment
>
> [wanpipe1]
> CARD_TYPE?????? = AFT
> S514CPU???????? = A
> CommPort??????? = PRI
> AUTO_PCISLOT??? = NO
> PCISLOT???????? = 4
> PCIBUS????????? = 12
> FE_MEDIA??????? = E1
> FE_LCODE??????? = HDB3
> FE_FRAME??????? = NCRC4
> FE_LINE???????? = 1
> TE_CLOCK??????? = NORMAL
> TE_REF_CLOCK??? = 0
> TE_HIGHIMPEDANCE??????? = NO
> TE_RX_SLEVEL??? = 120
> LBO???????????? = 120OH
> TE_SIG_MODE???? = CCS
> FE_TXTRISTATE?? = NO
> MTU???????????? = 1500
> UDPPORT???????? = 9000
> TTL???????????? = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN?????? = 1
> TDMV_DCHAN????? = 0
> TDMV_HW_DTMF??? = NO
>
> [w1g1]
> ACTIVE_CH?????? = ALL
> TDMV_ECHO_OFF?? = NO
> TDMV_HWEC?????? = NO
>
> /etc/zaptel.conf:
> loadzone=uk
> defaultzone=uk
>
> #Sangoma A104 port 1 [slot:4 bus:12 span:1] <wanpipe1>
> span=1,0,0,ccs,hdb3
> bchan=1-31
>
> ztcfg -vvvv shows no error
>
> this is the error it outputs in the asterisk console
> [Oct 27 14:30:35] WARNING[4139]: mtp.c:457 t2_timeout: MTP2 timer T2
> timeout (failed to receive 'O', 'N', or 'E' after sending 'O'),???? initial
> alignment failed on link 'l1'.
>
> A similar problem was posted on 15th January, 2008 by Pawel Ratajewski
> (Forweb) rataj at 4web.pl
> but i could not see any posted solution in the archives.
>
> Please help!
>
> Best Regards
> Ife
> ifeoyeneye at yahoo.co.uk
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081027/2bcebe4c/attachment-0001.htm
>
> ------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> End of asterisk-ss7 Digest, Vol 44, Issue 20
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081028/4d881d82/attachment.htm 