[asterisk-ss7] Initial Alignment Failure on asterisk+ss7 setup

Ifeoluwa Oyeneye ifeoyeneye at yahoo.co.uk
Mon Oct 27 09:11:34 CDT 2008


Hi folks,
I'm new to asterisk-ss7.I'm having problem connecting an asterisk box to a ss7 link. I'm making use of chan_ss7-1.0.0 with  a sangoma A104 card.
Here is my configuration:
    
/etc/asterisk/ss7.conf:
[linkset-suic]
enabled => yes
use_connect => no
enable_st => yes
hunting_policy => even_mru
subservice => auto
context => default

[link-l1]
linkset => suic
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes

[link-l2]
linkset => suic
channels => 1-31
schannel =>
firstcic => 33
enabled => no

[link-l3]
linkset => suic
channels => 1-31
schannel =>
firstcic => 65
enabled => no

[link-l4]
linkset => suic
channels => 1-31
schannel =>
firstcic => 97
enabled => no

[host-ast]
enabled => yes
opc => 123
dpc => suic:98
links => l1:1

/etc/wanpipe/wanpipe1.conf:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 4
PCIBUS          = 12
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = NCRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_HIGHIMPEDANCE        = NO
TE_RX_SLEVEL    = 120
LBO             = 120OH
TE_SIG_MODE     = CCS
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 0
TDMV_HW_DTMF    = NO

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = NO

/etc/zaptel.conf:
loadzone=uk
defaultzone=uk

#Sangoma A104 port 1 [slot:4 bus:12 span:1] <wanpipe1>
span=1,0,0,ccs,hdb3
bchan=1-31

ztcfg -vvvv shows no error

this is the error it outputs in the asterisk console
[Oct 27 14:30:35] WARNING[4139]: mtp.c:457 t2_timeout: MTP2 timer T2 timeout (failed to receive 'O', 'N', or 'E' after sending 'O'),     initial alignment failed on link 'l1'.

A similar problem was posted on 15th January, 2008 by Pawel Ratajewski (Forweb) rataj at 4web.pl
but i could not see any posted solution in the archives.

Please help!

Best Regards
Ife
ifeoyeneye at yahoo.co.uk




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081027/2bcebe4c/attachment.htm 


More information about the asterisk-ss7 mailing list