[asterisk-ss7] Loadsharing with libss7

[Domjan Attila]

so they are there:
svn co http://87.242.0.27/repos/trunk/chan_dahdi/
svn co http://87.242.0.27/repos/trunk/libss7/

todo:
- make ss7linktest work again
- documentation of the new features
- more tests with STP(s)
- ANSI: testing, implementing some ansi isup timers, moving some isup
messages into the new model and some work on the new mtp3 stuff
- set up default values of the isup/mtp3/q707 timers (currently disabled
if not configured)

On Fri, 2008-11-21 at 12:07 -0600, Matthew Fredrickson wrote:
> Domjan Attila wrote:
> > Hi,
> > thanks, today I have an interconnection (Lucent switch) and seems
> > everything ok, only need implement generic notification indication in
> > CPG (the switch use it instead of SUS/RES), I fixed the mtp3 restart
> > missimplementation. We will have another interconnection, the another
> > telco has STPs the current not, so the STP related stuff not tested yet
> > with switch (inhibit, TFP).
> > I will do some more tests tomorrow and I think after it should merging
> > the patches.
> 
> Great to hear!
> 
> Matthew Fredrickson
> Digium, Inc.
> 
> > 
> > Regards,
> > Attila
> >  
> > On Tue, 2008-11-18 at 11:42 +0500, Anton wrote:
> >> Hey Domjan,
> >>
> >> Your patches great, I'm already using them on one of my live 
> >> servers. I've noticed one issue with them in the tests, but 
> >> it's not too critical.
> >>
> >> Regards,
> >> Anton.
> >>
> >> On Tuesday 18 November 2008 01:32, Domjan Attila wrote:
> >>> Hi,
> >>> I hope tomorrow will be fixed my leased lines and this
> >>> week we will finish the interconnection tests and you can
> >>> inspect my patches.
> >>>
> >>> Rgards,
> >>> Attila
> >>>
> >>> On Mon, 2008-11-17 at 11:02 -0600, Matthew Fredrickson 
> >> wrote:
> >>>> Tobias Wolf wrote:
> >>>>> Matthew Fredrickson schrieb:
> >>>>>> Kristian Nielsen wrote:
> >>>>>>> Tobias Wolf <tobias.wolf at evision.de> writes:
> >>>>>>>
> >>>>>>> I believe you can do this with chan_ss7, setting up
> >>>>>>> two boxes as a cluster, though I think you would
> >>>>>>> set up both boxes with the same point code. This is
> >>>>>>> important not only to get load sharing but also to
> >>>>>>> be able to do system maintenance without downtime,
> >>>>>>> and is a standard in the MPT3 part of SS7.
> >>>>> I have not checked chan_ss7 yet, because libss7 works
> >>>>> very well for us. but maybe it is worth a look ;)
> >>>>>
> >>>>>> That is correct.  At this time, we don't have the
> >>>>>> ability to share a single point code between
> >>>>>> multiple machines.
> >>>>>>
> >>>>>>> possible to do it using two different point codes
> >>>>>>> as you describe with some help from the switch at
> >>>>>>> the other end?
> >>>>>> That's the way I would advise doing it for the time
> >>>>>> being...
> >>>>> I have checked with the owner of the ss7 switch and
> >>>>> it supports this.
> >>>>>
> >>>>> any idea when sharing a point code between two (or
> >>>>> more?) asterisk server will be possible. is this on
> >>>>> any roadmap, yet ?
> >>>> Besides getting everything ready so that we pass all
> >>>> interconnection tests, it is the next highest priority.
> >>>>
> >>>> Matthew Fredrickson
> >>>> Digium, Inc.
> >>>>
> >>>> _______________________________________________
> >>>> --Bandwidth and Colocation Provided by
> >>>> http://www.api-digital.com--
> >>>>
> >>>> asterisk-ss7 mailing list
> >>>> To UNSUBSCRIBE or update options visit:
> >>>>   
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >>>>
> >>>> ------------------------------------------------------------------------
> >>>>
> >>>> _______________________________________________
> >>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>>>
> >>>> asterisk-ss7 mailing list
> >>>> To UNSUBSCRIBE or update options visit:
> >>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081121/3d40e426/attachment-0001.pgp