[asterisk-ss7] Help with libss7 configuration

[Wasim Baig]

Anton:

 I was mistaken. At last test sig mtp2 did NOT work with Sangoma cards.
The cards did work with sig = dchan. I'm going to delve further into this
and identify why not.

Apologies.

-wasim

On Thu, Jul 10, 2008 at 4:13 PM, Anton <anton.vazir at gmail.com> wrote:

> Wasim,
>
> As I understand, mtp2 is hardwarely assisted sigchannel,
> which functionality is implemented in DIGIUM cards to act
> like dchan in PRI. I'd like just to confirm that we're
> speaking about the same, and if so SANGOMA must have such a
> support in their firmware too. As I know SANGOMA have
> hardware assistance in their card for the own SS7 solution,
> but will this work for Asterisk SS7 - is a question.
>
> On Thursday 10 July 2008 15:10, Wasim Baig wrote:
> > 2008/7/10 Mark Wilkinson <mark.wilkinson at 2pmtech.com>:
> > >  Hi Anton,
> > >    I can only comment on it working with a Digium
> > > TE410P card
> > >
> > > Sorry, I don't have any Sangoma cards.
> >
> > I can confirm it works with Sangoma cards as well as
> > ofcourse, Digium cards. If you are using Sangoma cards,
> > make sure you disable HW_TDM on the signalling channel.
>

-- 
wasim h. baig | principal consultant | convergence pk | +92 300 8508070
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080710/ff3aac61/attachment.htm