[asterisk-ss7] chan_ss7 idle reset pending

[Mark Pieter]

Hi all,

I am using chan_ss7 1.0 with asterisk 1.4.17.  I have compiled and
installed the packages successfully. However asterisk could not answer
any call.

here are some commands to show the status of the link:

localhost*CLI> ss7 link status 
linkset siuc, link |1, schannel 1, sls 0, INSERVICE, rx: 1, tx: 0/3,
sentseq/lastack: 4/4, total    116992,    117072

localhost*CLI> ss7 show channels 
Linkset: siuc> 
CIC   3 Idle Reset pending
CIC   4 Idle Reset pending
CIC   5 Idle Reset pending
CIC   6 Idle Reset pending
CIC   7 Idle Reset pending
CIC   8 Idle Reset pending
CIC   9 Idle Reset pending
CIC  10 Idle Reset pending
CIC  11 Idle Reset pending
CIC  12 Idle Reset pending
CIC  13 Idle Reset pending
CIC  14 Idle Reset pending
CIC  15 Idle Reset pending
CIC  16 Idle Reset pending
CIC  17 Idle Reset pending
CIC  18 Idle Reset pending
CIC  19 Idle Reset pending
CIC  20 Idle Reset pending
CIC  21 Idle Reset pending
CIC  22 Idle Reset pending
CIC  23 Idle Reset pending
CIC  24 Idle Reset pending
CIC  25 Idle Reset pending
CIC  26 Idle Reset pending
CIC  27 Idle Reset pending
CIC  28 Idle Reset pending
CIC  29 Idle Reset pending
CIC  30 Idle Reset pending
CIC  31 Idle Reset pending
CIC  32 Idle Reset pending


Here are some error messages that appeared on the console

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The following error appears when I place a call to asterisk from outside

[Jan 18 19:51:33] NOTICE[3968]: isup.c:489 decode_isup_phonenum:
National (significant) or unknown nature of address indicator (1),
assuming international.
[Jan 18 19:51:33] WARNING[3968]: l4isup.c:2479 process_circuit_message:
Reset still in progress for CIC=30, typ=IAM, state=0 message discarded.
[Jan 18 19:51:41] WARNING[3968]: l4isup.c:2479 process_circuit_message:
Reset still in progress for CIC=29, typ=REL, state=0 message discarded.
[Jan 18 19:51:44] WARNING[3968]: l4isup.c:2479 process_circuit_message:
Reset still in progress for CIC=30, typ=REL, state=0 message discarded.
[Jan 18 19:51:45] NOTICE[3968]: l4isup.c:1220 t22_timeout: T22 timeout
(No "circuit group reset acknowledge" from peer) CIC=3.



----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


[Jan 18 19:52:59] NOTICE[3968]: mtp.c:1007 mtp2_process_lssu: Got status
indication 'OS' while INSERVICE on link '|1'.
[Jan 18 19:52:59] WARNING[3968]: chan_ss7.c:621 process_event: MTP is
now DOWN on link '|1'.
[Jan 18 19:52:59] NOTICE[3968]: mtp.c:580 mtp_changeover: MTP changeover
last_ack=13, last_sent=13, from schannel 1, no INSERVICE schannel found
[Jan 18 19:52:59] NOTICE[3968]: mtp.c:584 mtp_changeover: Failover not
possible, no other signalling link and no other host available.
[Jan 18 19:52:59] WARNING[3968]: chan_ss7.c:621 process_event: MTP is
now DOWN on link '|1'.
[Jan 18 19:53:01] NOTICE[3968]: mtp.c:1130 mtp2_good_frame: Sending TRA
to peer on link '|1'....
[Jan 18 19:53:01] WARNING[3968]: chan_ss7.c:617 process_event: MTP is
now UP on link '|1'.
----------------------------------------------------------------------------------------------------------------------------

This error appears after 2 minutes and I have to restart asterisk 

[Jan 18 19:50:53] NOTICE[3910]: mtp.c:340 mtp_put: Full MTP receivebuf,
event lost, type=15.

------------------------------------------------------------------------------------------

I have started ss7 dump to see the MTP and ISUP messages. I can send it
if needed

Any help will be appreciated.


-- 
Mark Pieter <mark.pieter75 at gmail.com>