[asterisk-ss7] Starting with SS7. Channel-Configuration

[Tobias Wolf]

Hi,

i have just registered at www.digium.com to get the Documentation. I
fear that the spans on the card are configured for T1. Here is the
output of dmesg:

[1638947.012147] Zaptel Version: 1.4.5.1
[1638947.012218] Zaptel Echo Canceller: MG2
[1638947.024123] Found TE2XXP at base address decffc00, remapped to f88c4c00
[1638947.024213] TE2XXP version c01a016a, burst ON, slip debug: OFF
[1638947.024743] Octasic optimized!
[1638947.024827] FALC version: 00000005, Board ID: 00
[1638947.024897] Reg 0: 0x31d5f400
[1638947.024960] Reg 1: 0x31d5f000
[1638947.025023] Reg 2: 0xffffffff
[1638947.025087] Reg 3: 0x00000000
[1638947.025159] Reg 4: 0x00000101
[1638947.025232] Reg 5: 0x00000000
[1638947.025301] Reg 6: 0xc01a016a
[1638947.025366] Reg 7: 0x00001000
[1638947.025427] Reg 8: 0x010200ff
[1638947.025509] Reg 9: 0x00fd0001
[1638947.025580] Reg 10: 0x0000004a
[1638947.025697] TE2XXP: Launching card: 0
[1638947.025765] TE2XXP: Setting up global serial parameters
[1638947.027214] Found a Wildcard: Wildcard TE220 (4th Gen)
[1638950.033295] About to enter spanconfig!
[1638950.033366] Done with spanconfig!
[1638950.033908] Registered tone zone 0 (United States / North America)
[1638950.033977] About to enter startup!
[1638950.034183] TE2XXP: Span 2 configured for ESF/B8ZS
[1638950.034357] wct2xxp: Setting yellow alarm on span 2
[1638950.034449] timing source auto card 0!
[1638950.037283] VPM400: Not Present
[1638950.064331] VPM450: firmware zaptel-fw-oct6114-064.bin not
available from userspace
[1638950.064463] Completed startup!

Could the jumper setting on the card create an issue with SS7 connection
to an Erricson AXE ?

Regards,

-- 

  Tobias Wolf

  Leiter Softwareentwicklung / Kommunikationslösungen

  Evision GmbH



  Wittekindstr. 105

  44139 Dortmund

  Tel: +49 (0)231 - 47790 307

  Fax: +49 (0)231 - 47790 500

  http://www.evision.de



This electronic mail transmission and any accompanying attachments
contain confidential information intended only for the use of the
individual or entity named above. Any dissemination, distribution,
copying or action taken in reliance on the contents of this
communication by anyone other than the intended recipient is strictly
prohibited. If you have received this communication in error
please immediately delete the E-mail and notify the sender at the
above E-mail address. Thank you.
Hövener & Trapp Evision GmbH, Dortmund - HRB Nr.12477, Registergericht
Dortmund - Geschäftsführer Christoph Begall