[asterisk-ss7] RES: asterisk-ss7 Digest, Vol 27, Issue 15
Virmones P.T de Miranda
virmones.tavares at govoip.com.br
Wed May 30 16:26:39 MST 2007
Iam solve this problem, after 2 days just using:
rmmod zttranscode
-----Mensagem original-----
De: asterisk-ss7-bounces at lists.digium.com
[mailto:asterisk-ss7-bounces at lists.digium.com] Em nome de
asterisk-ss7-request at lists.digium.com
Enviada em: quarta-feira, 30 de maio de 2007 19:19
Para: asterisk-ss7 at lists.digium.com
Assunto: asterisk-ss7 Digest, Vol 27, Issue 15
Send asterisk-ss7 mailing list submissions to
asterisk-ss7 at lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-ss7
or, via email, send a message with subject or body 'help' to
asterisk-ss7-request at lists.digium.com
You can reach the person managing the list at
asterisk-ss7-owner at lists.digium.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-ss7 digest..."
Today's Topics:
1. Tormenta TOR3 card Asterisk chan_ss7 (Andrew Somov)
2. Re: Tormenta TOR3 card Asterisk chan_ss7 (Robert Kenton)
----------------------------------------------------------------------
Message: 1
Date: Wed, 30 May 2007 20:21:49 +0000 (GMT)
From: Andrew Somov <asomov12 at yahoo.co.uk>
Subject: [asterisk-ss7] Tormenta TOR3 card Asterisk chan_ss7
To: asterisk-ss7 at lists.digium.com
Message-ID: <240724.13787.qm at web26603.mail.ukl.yahoo.com>
Content-Type: text/plain; charset=ascii
Tormenta TOR3 card Asterisk chan_ss7 problem. SS7 link is flupping, Need
help!!!
I was trying to interconnect with several providers, the result was the
same. The link is going up for a several seconds, then
failed with strings bellow. The channel was compiled without errors and
asterisk has started with no warnings.
Asterisk-1.2.18, chan_ss7 - 0.9 , chan_oh323, CentOS4.4 2.6.9-48.ELsmp,
the zaptel tor3e driver was pulled from http://www.govarion.com/tor3/,
the server is dual Intel(R) Xeon(TM) CPU 3.06GHz stepping
09(hyperthreading on).
This issue is quite close to
http://lists.digium.com/pipermail/asterisk-ss7/2006-July/000410.html
and
http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_n
oise.html
I was explored through all and still have the same result.
Getting this error while trying to connect to the provider (DMS switch). the
ss7 link status dives:
linkset testlink, link l1, schannel 16, INSERVICE, rx: 5, tx: 3/3,
sentseq/lastack: 3/3, total 33458560, 33458624
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=1, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=2, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=3, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=4, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=5, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=6, typ=UBL message discarded.
May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=7, typ=UBL message discarded.
etc. (cut)
May 30 16:48:15 WARNING[12951]: mtp.c:791 timeout_sltm_t1: No SLTA received
within Q.707 timer T1, trying again on link 'l1'.
May 30 16:48:24 ERROR[12951]: mtp.c:796 timeout_sltm_t1: No SLTA received
within Q.707 timer T1, faulting link on link 'l1'.
May 30 16:48:24 WARNING[12951]: chan_ss7.c:636 monitor_main: MTP is now DOWN
on link 'l1'.
May 30 16:48:24 NOTICE[12951]: mtp.c:502 mtp_changeover: MTP changeover
last_ack=3, last_sent=3, from schannel 16, no INSERVICE schannel found
May 30 16:48:24 NOTICE[12951]: mtp.c:506 mtp_changeover: Failover not
possible, no other signalling link and no other host available.
testlink*CLI> ss7 link status
linkset testlink, link l1, schannel 16, DOWN, rx: 2, tx: 4/4,
sentseq/lastack: 3/4, total 33467808, 33467872
testlink*CLI> ss7 link status
linkset testlink, link l1, schannel 16, NOT_ALIGNED, rx: 0, tx: 1/4,
sentseq/lastack: 127/127, total 35673520, 35673584
May 30 16:49:40 WARNING[12951]: mtp.c:424 t2_timeout: MTP2 timer T2
timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial
alignment failed on link 'l1'.
My /etc/asterisk/zapata.conf is empty,
cat /etc/zaptel.conf gives
span=1,1,0,ccs,hdb3
bchan=1-31
span=2,2,0,ccs,hdb3
bchan=32-62
span=3,3,0,ccs,hdb3
bchan=63-93
span=4,4,0,ccs,hdb3
bchan=94-124
loadzone = uk
defaultzone = uk
cat /etc/asterisk/ss7.conf :
[linkset-testlink]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => even_mru
;t35 => 15000,timeout
subservice => 8
context => default
language => en
[link-l1]
linkset => testlink
enabled => yes
channels => 1-15,17-31
schannel => 16
firstcic => 1
[link-l2]
linkset => testlink
enabled => yes
channels => 1-15,17-31
schannel =>
firstcic => 33
[link-l3]
enabled => yes
linkset => testlink
channels => 1-15,17-31
schannel =>
firstcic => 65
[link-l4]
enabled => no
linkset => testlink
channels => 1-15,17-31
schannel =>
firstcic => 97
[host-host.domain.com]
enabled => yes
default_linkset => testlink
;autopc => yes
opc => 0x27f2 ;13131
dpc => testlink:0x3b48 ;->provider1 (0x334b ;-> provider2)
if-1 => my.host.ip.addr
links => l1:1,l2:2,l3:3,l4:4
/sbin/lsmod
Module Size Used by
zttranscode 12552 0
tor3e 89116 0
zaptel 186532 184 zttranscode,tor3e
crc_ccitt 6209 1 zaptel
md5 8129 1
ipv6 243425 30
autofs4 25413 0
sunrpc 143909 1
button 10705 0
battery 12997 0
ac 8901 0
hw_random 9685 0
e1000 119249 0
floppy 58193 0
ata_piix 19141 0
libata 105757 1 ata_piix
sg 38369 0
dm_snapshot 21093 0
dm_zero 6337 0
dm_mirror 31173 0
ext3 119113 2
jbd 59609 1 ext3
dm_mod 64617 8 dm_snapshot,dm_zero,dm_mirror
aic79xx 187613 5
sd_mod 20545 9
scsi_mod 119757 4 libata,sg,aic79xx,sd_mod
cat /proc/interrupts gives shows that tor3e IRQ 217 is in the different CPU
from the eth0 network card:
CPU0 CPU1 CPU2 CPU3
0: 2981832 2911004 2910992 2904442 IO-APIC-edge timer
1: 8 69 50 0 IO-APIC-edge i8042
8: 1 0 0 0 IO-APIC-edge rtc
9: 9 0 0 0 IO-APIC-level acpi
185: 30 0 0 0 IO-APIC-level aic79xx
193: 4999 1944 3374 8368 IO-APIC-level aic79xx
201: 52790 0 0 0 IO-APIC-level eth0
217: 0 5284112 5280614 20005 IO-APIC-level tor3e
NMI: 0 0 0 0
LOC: 11708215 11708091 11708090 11708212
ERR: 0
MIS: 0
#lspci -vb gives me the output bellow. (On IRQ 9 there are olso RAID bus,
ethernet, and I mentioned there is no latency)
#lspci -v gives IRQ 217, proved that APIC is running and it is unique.
03:0a.0 Bridge: PLX Technology, Inc.: Unknown device d44d (rev 01)
Subsystem: PLX Technology, Inc.: Unknown device 9030
Flags: medium devsel, IRQ 9
Memory at fe6f0000 (32-bit, non-prefetchable)
I/O ports at 2000
Memory at fe6e0000 (32-bit, non-prefetchable)
Memory at fe6d0000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 1
Capabilities: [48] #06 [0000]
Capabilities: [4c] Vital Product Data
#dmesg output shows:
ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 28 (level, low) -> IRQ 217
Detected Tormenta 3 Quad E1 - TOR3 at 0xfe6e0000/0xfe6d0000 irq 217
Xilinx Chip successfully loaded, configured and started!!
Detected Card number: 0
Tor3: Launching card: 0
Registered Tormenta 3-E PCI
Registered tone zone 4 (United Kingdom)
SPAN 1: Primary Sync Source
SPAN 2: Secondary Sync Source
SPAN 3: Tertiary Sync Source
SPAN 4: Quaternary Sync Source
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.17.1
Zaptel Echo Canceller: KB1
Zaptel: Master changed to Tor3/0/2
Zaptel: Master changed to Tor3/0/3
Zaptel: Master changed to Tor3/0/4
Zaptel: Master changed to Tor3/0/1
Zaptel Transcoder support loaded
So, my question is: is it possible to make a chan_ss7 work with
Govarion Tormenta 3 cards at all? Or shell I migrate to the native
asterisk SS7? I'll appreciate any help.
___________________________________________________________
Inbox full of unwanted email? Get leading protection and 1GB storage with
All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html
------------------------------
Message: 2
Date: Wed, 30 May 2007 18:12:49 -0400
From: "Robert Kenton" <robert.kenton at gmail.com>
Subject: Re: [asterisk-ss7] Tormenta TOR3 card Asterisk chan_ss7
To: asterisk-ss7 at lists.digium.com
Message-ID:
<9fb0089c0705301512l6a30456ema9ddb6142d35aee0 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hmmm.... It seems a wrong PC configuration.
The link is aligned but after sending the SLTM, it's waitng for the SLTA
which never arrive.
On the remote end, they are sending an UBL message that indicate they has
sent and received a correct SLTM/SLTA.
Verify PC and SLC on both ends (chan_ss7 and Siemens side).
Robert.
On 5/30/07, Andrew Somov <asomov12 at yahoo.co.uk> wrote:
>
> Tormenta TOR3 card Asterisk chan_ss7 problem. SS7 link is flupping, Need
> help!!!
>
> I was trying to interconnect with several providers, the result was the
> same. The link is going up for a several seconds, then
>
> failed with strings bellow. The channel was compiled without errors and
> asterisk has started with no warnings.
>
> Asterisk-1.2.18, chan_ss7 - 0.9 , chan_oh323, CentOS4.4 2.6.9-48.ELsmp,
> the zaptel tor3e driver was pulled from http://www.govarion.com/tor3/,
> the server is dual Intel(R) Xeon(TM) CPU 3.06GHz stepping
> 09(hyperthreading on).
>
>
>
> This issue is quite close to
> http://lists.digium.com/pipermail/asterisk-ss7/2006-July/000410.html
> and
>
>
>
http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_n
oise.html
>
> I was explored through all and still have the same result.
>
>
>
> Getting this error while trying to connect to the provider (DMS switch).
> the ss7 link status dives:
>
> linkset testlink, link l1, schannel 16, INSERVICE, rx: 5, tx: 3/3,
> sentseq/lastack: 3/3, total 33458560, 33458624
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=1, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=2, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=3, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=4, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=5, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=6, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=7, typ=UBL message discarded.
> etc. (cut)
>
> May 30 16:48:15 WARNING[12951]: mtp.c:791 timeout_sltm_t1: No SLTA
> received within Q.707 timer T1, trying again on link 'l1'.
>
> May 30 16:48:24 ERROR[12951]: mtp.c:796 timeout_sltm_t1: No SLTA received
> within Q.707 timer T1, faulting link on link 'l1'.
>
> May 30 16:48:24 WARNING[12951]: chan_ss7.c:636 monitor_main: MTP is now
> DOWN on link 'l1'.
>
> May 30 16:48:24 NOTICE[12951]: mtp.c:502 mtp_changeover: MTP changeover
> last_ack=3, last_sent=3, from schannel 16, no INSERVICE schannel found
>
> May 30 16:48:24 NOTICE[12951]: mtp.c:506 mtp_changeover: Failover not
> possible, no other signalling link and no other host available.
>
> testlink*CLI> ss7 link status
>
> linkset testlink, link l1, schannel 16, DOWN, rx: 2, tx: 4/4,
> sentseq/lastack: 3/4, total 33467808, 33467872
>
> testlink*CLI> ss7 link status
>
> linkset testlink, link l1, schannel 16, NOT_ALIGNED, rx: 0, tx: 1/4,
> sentseq/lastack: 127/127, total 35673520, 35673584
>
> May 30 16:49:40 WARNING[12951]: mtp.c:424 t2_timeout: MTP2 timer T2
> timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial
> alignment failed on link 'l1'.
>
>
>
> My /etc/asterisk/zapata.conf is empty,
>
> cat /etc/zaptel.conf gives
>
> span=1,1,0,ccs,hdb3
>
> bchan=1-31
>
> span=2,2,0,ccs,hdb3
>
> bchan=32-62
>
> span=3,3,0,ccs,hdb3
>
> bchan=63-93
>
> span=4,4,0,ccs,hdb3
>
> bchan=94-124
>
> loadzone = uk
>
> defaultzone = uk
>
>
>
> cat /etc/asterisk/ss7.conf :
>
>
>
> [linkset-testlink]
>
> enabled => yes
>
> enable_st => no
>
> use_connect => no
>
> hunting_policy => even_mru
>
> ;t35 => 15000,timeout
>
> subservice => 8
>
> context => default
>
> language => en
>
>
>
> [link-l1]
>
> linkset => testlink
>
> enabled => yes
>
> channels => 1-15,17-31
>
> schannel => 16
>
> firstcic => 1
>
>
>
> [link-l2]
>
> linkset => testlink
>
> enabled => yes
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 33
>
>
>
> [link-l3]
>
> enabled => yes
>
> linkset => testlink
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 65
>
>
>
> [link-l4]
>
> enabled => no
>
> linkset => testlink
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 97
>
>
>
> [host-host.domain.com]
>
> enabled => yes
>
> default_linkset => testlink
>
> ;autopc => yes
>
> opc => 0x27f2 ;13131
>
> dpc => testlink:0x3b48 ;->provider1 (0x334b ;-> provider2)
>
> if-1 => my.host.ip.addr
>
> links => l1:1,l2:2,l3:3,l4:4
>
>
>
> /sbin/lsmod
>
> Module Size Used by
>
> zttranscode 12552 0
>
> tor3e 89116 0
>
> zaptel 186532 184 zttranscode,tor3e
>
> crc_ccitt 6209 1 zaptel
>
> md5 8129 1
>
> ipv6 243425 30
>
> autofs4 25413 0
>
> sunrpc 143909 1
>
> button 10705 0
>
> battery 12997 0
>
> ac 8901 0
>
> hw_random 9685 0
>
> e1000 119249 0
>
> floppy 58193 0
>
> ata_piix 19141 0
>
> libata 105757 1 ata_piix
>
> sg 38369 0
>
> dm_snapshot 21093 0
>
> dm_zero 6337 0
>
> dm_mirror 31173 0
>
> ext3 119113 2
>
> jbd 59609 1 ext3
>
> dm_mod 64617 8 dm_snapshot,dm_zero,dm_mirror
>
> aic79xx 187613 5
>
> sd_mod 20545 9
>
> scsi_mod 119757 4 libata,sg,aic79xx,sd_mod
>
>
>
> cat /proc/interrupts gives shows that tor3e IRQ 217 is in the different
> CPU from the eth0 network card:
>
>
>
> CPU0 CPU1 CPU2 CPU3
>
> 0: 2981832 2911004 2910992 2904442 IO-APIC-edge timer
>
> 1: 8 69 50 0 IO-APIC-edge i8042
>
> 8: 1 0 0 0 IO-APIC-edge rtc
>
> 9: 9 0 0 0 IO-APIC-level acpi
>
> 185: 30 0 0 0 IO-APIC-level aic79xx
>
> 193: 4999 1944 3374 8368 IO-APIC-level aic79xx
>
> 201: 52790 0 0 0 IO-APIC-level eth0
>
> 217: 0 5284112 5280614 20005 IO-APIC-level tor3e
>
> NMI: 0 0 0 0
>
> LOC: 11708215 11708091 11708090 11708212
>
> ERR: 0
>
> MIS: 0
>
>
>
> #lspci -vb gives me the output bellow. (On IRQ 9 there are olso RAID bus,
> ethernet, and I mentioned there is no latency)
>
> #lspci -v gives IRQ 217, proved that APIC is running and it is unique.
>
> 03:0a.0 Bridge: PLX Technology, Inc.: Unknown device d44d (rev 01)
>
> Subsystem: PLX Technology, Inc.: Unknown device 9030
>
> Flags: medium devsel, IRQ 9
>
> Memory at fe6f0000 (32-bit, non-prefetchable)
>
> I/O ports at 2000
>
> Memory at fe6e0000 (32-bit, non-prefetchable)
>
> Memory at fe6d0000 (32-bit, non-prefetchable)
>
> Capabilities: [40] Power Management version 1
>
> Capabilities: [48] #06 [0000]
>
> Capabilities: [4c] Vital Product Data
>
>
>
> #dmesg output shows:
>
> ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 28 (level, low) -> IRQ 217
>
> Detected Tormenta 3 Quad E1 - TOR3 at 0xfe6e0000/0xfe6d0000 irq 217
>
> Xilinx Chip successfully loaded, configured and started!!
>
> Detected Card number: 0
>
> Tor3: Launching card: 0
>
> Registered Tormenta 3-E PCI
>
> Registered tone zone 4 (United Kingdom)
>
> SPAN 1: Primary Sync Source
>
> SPAN 2: Secondary Sync Source
>
> SPAN 3: Tertiary Sync Source
>
> SPAN 4: Quaternary Sync Source
>
> Zapata Telephony Interface Registered on major 196
>
> Zaptel Version: 1.2.17.1
>
> Zaptel Echo Canceller: KB1
>
> Zaptel: Master changed to Tor3/0/2
>
> Zaptel: Master changed to Tor3/0/3
>
> Zaptel: Master changed to Tor3/0/4
>
> Zaptel: Master changed to Tor3/0/1
>
> Zaptel Transcoder support loaded
>
>
>
> So, my question is: is it possible to make a chan_ss7 work with
> Govarion Tormenta 3 cards at all? Or shell I migrate to the native
> asterisk SS7? I'll appreciate any help.
>
>
>
>
> ___________________________________________________________
> Inbox full of unwanted email? Get leading protection and 1GB storage with
> All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070530/e4c1573e
/attachment.htm
------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
End of asterisk-ss7 Digest, Vol 27, Issue 15
********************************************
More information about the asterisk-ss7
mailing list