[asterisk-ss7] Two Asterisk boxes, only ONE signal link

[asterisk at nicox.org]

I configured it now like this, but in my configuration (exactly like the 
configuration from Patrick, the Cluster-Link swaps up and down, and i 
don't know where is the problem, does anybody seen this before?

ay  7 13:11:04 NOTICE[1744]: cluster.c:751 cluster_thread_main: Connected 
to receiver host: srv25, inf 1, addr 10.0.43.195
May  7 13:11:04 NOTICE[1744]: cluster.c:751 cluster_thread_main: Connected 
to receiver host: srv25, inf 1, addr 10.0.43.195
May  7 13:11:04 WARNING[1744]: cluster.c:227 check_senders: No alive 
signal from srv25 10.0.43.195, for 1499 msec
May  7 13:11:04 DEBUG[1744]: cluster.c:357 disconnect_receiver: Disconnect 
receiver srv25 0
May  7 13:11:04 DEBUG[1744]: cluster.c:357 disconnect_receiver: Disconnect 
receiver srv25 0
May  7 13:11:04 WARNING[1744]: cluster.c:170 declare_host_state: No alive 
signal from srv25, assumed down.
May  7 13:11:04 NOTICE[1744]: cluster.c:742 cluster_thread_main: Socket 
connection failed to host: srv25, inf 1, addr 10.0.43.195, error: Success
May  7 13:11:04 NOTICE[1744]: cluster.c:742 cluster_thread_main: Socket 
connection failed to host: srv25, inf 1, addr 10.0.43.195, error: Success
May  7 13:11:05 WARNING[1744]: cluster.c:211 set_sender_last: Alive signal 
from srv25 10.0.43.195
May  7 13:11:05 WARNING[1744]: cluster.c:173 declare_host_state: Alive 
signal from srv25, now up.
May  7 13:11:05 NOTICE[1744]: cluster.c:700 cluster_thread_main: Accepted 
socket connection from srv25, fd 120
May  7 13:11:06 NOTICE[1744]: cluster.c:543 cluster_receive_packet: Could 
not read received packet: Bad file descriptor.
May  7 13:11:06 NOTICE[1744]: cluster.c:719 cluster_thread_main: Got error 
on accepted socket: 2 Success
May  7 13:11:06 DEBUG[1744]: cluster.c:402 connect_receiver: Trying to 
connect to srv25 10.0.43.195
May  7 13:11:06 DEBUG[1744]: cluster.c:402 connect_receiver: Trying to 
connect to srv25 10.0.43.195


always the same....

Thanks a lot

Nico


On Wed, 11 Apr 2007, Patrick Blackman wrote:

> Sure. It's the same for both cluster machines.
> I'm using the same version as you, with the "cluster.c" patch.
> Btw, did you try configuring just one linkset for both links? 2 linksets
> didn't work for me (I get a "segmentation fault" that crashes asterisk).
>
>
> [linkset-siuc]
> enabled => yes
> enable_st => no
> use_connect => no
> hunting_policy => seq_lth
> context => default
> language => da
> t35 => 15000,timeout
> subservice => auto
>
> [link-l3]
> linkset => siuc
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> enabled => yes
> echocancel => no
> echocan_train => 350
> echocan_taps => 128
>
> [link-l4]
> linkset => siuc
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => yes
> echocancel => no
> echocan_train => 350
> echocan_taps => 128
>
> [host-AST000012]
> enabled => yes
> default_linkset => siuc
> opc => 0x2
> dpc => siuc:0x1
> links => l3:1
> if-1 => 192.168.0.68
>
> [host-AST000015]
> enabled => yes
> default_linkset => siuc
> opc => 0x2
> dpc => siuc:0x1
> links => l4:2
> if-1 => 192.168.0.61
> ;
> [cluster]
> port => 5040
> l3 => AST000015#if-1
> l4 => AST000012#if-1
> Regards,
> Patrick
>
>
> On 4/11/07, Tusar <tusarbd at gmail.com> wrote:
>>
>>  Hi,
>> 
>> Thanks for your great help . I need one more help as I still have no luck
>> for success :-( .
>> Can you please paste the both Asterisk Box's [Asterisk1 & Asterisk2]
>> ss7.conf file for the client side.
>> 
>> So that I can cross check my config file with you. Yes , I tried "channels
>> => 1-31" at the "Telco Side" .
>> 
>> Which version are you using ? I have tried "v.0.9" [with and without]
>> patched the "cluster.c" provided from [Anders Baekgaard <ab at sifira.dk>] .
>> 
>> --- cluster.c~  2006-04-19 09:54:08.000000000 +0200
>> +++ cluster.c   2007-03-23 09:51: 25.000000000 +0100
>> @@ -847,9 +847,8 @@
>>     }
>>   }
>> 
>> -  if (this_host->has_signalling_receivers)
>> -    if (setup_receiver_socket())
>> -      goto fail;
>> +  if (setup_receiver_socket())
>> +    goto fail;
>>   connect_receivers();
>>   receivepipe[0] = receivepipe[1] = -1;
>>   receivebuf = lffifo_alloc(200000);
>> 
>> Thanks once again.
>> 
>> Best Regards,
>> 
>> ..Tusar..
>> 
>> 
>> On 4/11/07, Patrick Blackman <patrick.blackman at gmail.com> wrote:
>> 
>> > Tusar,
>> >
>> > Sorry for one detail that I missed: On the "telco side" ss7.conf, the
>> > correct configuration for link l2 is:
>> >
>> > [link-l2]
>> > linkset => siuc
>> > channels => 1-31
>> > schannel =>
>> > firstcic => 33
>> > enabled => yes
>> > echocancel => no
>> > echocan_train => 350
>> > echocan_taps => 128
>> >
>> > I was doing some tests and forgot to change the "channels => 1-5" back
>> > to "channels => 1-31"
>> >
>> > Patrick
>> >
>> >
>> >
>> >
>> >
>> 
>> 
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com 
>> <http://easynews.com/>--
>> 
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> 
>> 
>