[asterisk-ss7] chan_ss7 -> REL-29 before IAM

[umar tarar]

o actually, the typo '[link-ls]' may have created a confusion, you've to
change it in '[link-l2]' to as 'schannel=>'

On 3/28/07, Alexandre <alexandrekeller at gmail.com> wrote:
>
> If I do that the following message appears:
>
> Asterisk Ready.
> *CLI>
> *CLI> Mar 28 10:37:34 WARNING[23738]: mtp.c:1669 mtp_thread_main: No
> signalling links inservice and no cluster receivers alive, dropping packet!
>
>
> Any ideas ?!
>
> On 3/14/07, umar tarar <umar.tarar at gmail.com> wrote:
> >
> > are you sure that u've two E1s each have a signalling link, if not then
> > you should change the statement 'schannel=>16' in [link-ls] to as
> > 'schannel=>'   (i.e. don't specify '16' in it)
> >
> > On 3/12/07, Alexandre < alexandrekeller at gmail.com> wrote:
> >
> > > Hi there !!!
> > >
> > > I've installed chan_ss7-0.9 on my Asterisk 1.2.16 and Zaptel-1.2.15.
> > >
> > > My zaptel.conf:
> > > atualss7:/etc/asterisk#  cat ../zaptel.conf
> > > span=1,1,0,ccs,hdb3
> > > bchan=1-31
> > >
> > > span=2,0,0,ccs,hdb3
> > > bchan=32-62
> > >
> > > loadzone = us
> > > defaultzone=us
> > >
> > > My ss7.conf
> > > atualss7:/etc/asterisk# cat ss7.conf
> > > [linkset-siuc]
> > > enabled => yes
> > > enable_st => no
> > > use_connect => yes
> > > hunting_policy => even_mru
> > > context => ss7
> > > ; The value and action for t35. Value is in msec, action is either st
> > > or timeout
> > > ; If you use overlapped dialling dial plan, you might choose: t35 =>
> > > 4000,st
> > > t35 => 15000,timeout
> > > ; The subservice field: national (8), international (0), auto or
> > > decimal/hex value
> > > ; The auto means that the subservice is obtained from first received
> > > SLTM
> > > subservice => auto
> > >
> > >
> > > [link-l1]
> > > linkset => siuc
> > > channels => 1-15,17-31
> > > schannel => 16
> > > firstcic => 1
> > > enabled => yes
> > > ; Echo cancellation
> > > ; echocancel can be one of: no, 31speech (enable only when
> > > transmission medium is 3.1Khz speech), always
> > > echocancel => allways
> > > ; echocan_train specifies training period, between 10 to 100 msec
> > > ;echocan_train => 350
> > > ; echocan_taps specifies number of taps, 32, 64, 128 or 256
> > > echocan_taps => 128
> > >
> > >
> > > [link-l2]
> > > linkset => siuc
> > > channels => 1-15,17-31
> > > schannel => 16
> > > firstcic => 33
> > > enabled => yes
> > >
> > > [host-atualss7]
> > > enabled => yes
> > > ;opc => 0x8e0
> > > opc => 0x7d8
> > > ;dpc => siuc:0x3fff
> > > dpc => siuc:0x822
> > > links => l1:1,l2:2
> > > I?ve been trying to Dial as it follows:
> > > Mar  7 13:30:10 DEBUG[4222]: pbx.c:1697 pbx_extension_helper:
> > > Launching 'Dial'
> > >     -- Executing Dial("SIP/1234-081dca60", "SS7/49115002") in new
> > > stack
> > >     -- SS7 request (SS7/49115002) format = 0x8.
> > >     -- SS7 channel SS7/49115002 allocated successfully.
> > >
> > > My SS7 tech guy says he is receveing: Astk: IAM REL-29, than my PSTN
> > > answers with a RLC, but nothing happens, my softfoen keeps ring until gets a
> > > timeout.
> > >
> > > My PSTN PBX, where SS7 Link is connected is a SPTel DSX-100.
> > >
> > > Any help would be great. Because we're needing to install another 10
> > > links exactly like that using chan_ss7.
> > >
> > > Thanks in advance,
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > >
> > >
> >
> >
> > --
> >         |__\__/__|   /__/ \__\   |__| \__|
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>


-- 
        |__\__/__|   /__/ \__\   |__| \__|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070329/0e8e4be9/attachment.htm