[asterisk-ss7] ISUP Debugging HOWTO

[Anders Baekgaard]

Hello Ercan,

I've seen reports about the the ACM/CPG problem, but I've not been able to 
reproduce it. Please, can you send me the PDU dump together with the relevant 
part of your dial plan, and the asterisk debug log.

Best regards
Anders Baekgaard


On Thursday 22 March 2007 21:35, Ercan Yücebas wrote:
> Dear Kristian
>
> It helped me too much, now i'm realy sure that my chan_ss7 doesn't send
> ACM after an IAM. It just sending directly CPG Alerting.
>
> This behaviour isn't in ITU standarts and therefore the incumbend
> telecom operator here in Switzerland rejects there calls and sends
> inmediatelly an REL. chan_ss7 answers to that with an RLC as also
> expected.
>
> So I have to find out now, under which conditions chan_ss7 wants to send
> an ACM etc......
>
>
> Thanks again a lot
>
> BR
> Ercan
>
>
>
>
> -----Original Message-----
> From: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Kristian
> Nielsen
> Sent: Donnerstag, 22. März 2007 13:03
> To: asterisk-ss7 at lists.digium.com
> Subject: Re: [asterisk-ss7] ISUP Debugging HOWTO
>
> Ercan Yücebas <ercan at goldenphone.ch> writes:
> > I need to find out what is happening here with ss7 signaling. How can
>
> I
>
> > just debug the isup signalling messages?
>
>    ss7 dump start isup-debug.log both msu
>
> See here for more info:
>
>     http://voip-info.org/wiki/index.php?page=Asterisk+ss7+commands
>
>  - Kristian.