[asterisk-ss7] Siemens SDE - libss7

[Matthew Fredrickson]

On Jun 29, 2007, at 11:49 AM, Claudio Aznar wrote:

> Dear Matthew,
>
> 	Thank you for your answer. I'm attaching the config files so you can
> see them.
> 	The only msg that I can view in the PBX side is "SLT fault".
> 	In the README os libss7 it says that it was tested with EWSD, do you
> know the config files used for test?

You timing looks good.  That's the biggest thing I was concerned  
about.  I can't remember exactly, it was either a TE4xxp or a TE110P,  
when I tested it, but it was one of the two.  Maybe finding further  
into what that error means could help us.  It's possible that it's  
expecting periodic SLTM messages, which we don't do unless the other  
end does first right now.  But the meaning of that error is what  
ultimately matters.

---
Matthew Fredrickson
Software Engineer
Digium, Inc.



>
> Regards,
> Claudio Aznar
>
>
> -----Mensaje original-----
> De: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] En nombre de Matthew
> Fredrickson
> Enviado el: Viernes, 29 de Junio de 2007 11:32 a.m.
> Para: asterisk-ss7 at lists.digium.com
> Asunto: Re: [asterisk-ss7] Siemens SDE - libss7
>
> It almost looks like layer 1 problems.  The other end is dropping the
> link for some reason (sending SIOS after the link has been aligned).
> Is your timing correct in your zaptel.conf?
>
> ---
> Matthew Fredrickson
> Software Engineer
> Digium, Inc.
>
> On Jun 28, 2007, at 7:47 PM, Claudio Aznar wrote:
>
>> Dear list,
>>
>>
>>
>>             I'm trying to configure an Asterisk GW (Debian sarge w/
>> last trunk cvs version - r69519M). All the source compile fine and
>> I can install them without problem.
>>
>>
>>
>>             In the Asterisk side, I see this:
>>
>>
>>
>> *CLI> ss7 show linkset 1
>>
>>          SS7 linkset 1 status: Up
>>
>> *CLI> zap show status
>>
>>          Description                              Alarms
>> IRQ        bpviol     CRC4
>>
>>          Digium Wildcard TE110P T1/E1 Card 0      OK
>> 0          0          0
>>
>> *CLI> zap show channels
>>
>>         Chan Extension  Context         Language   MOH
>> Interpret        Blocked    State
>>
>>         pseudo            prepago         es
>> default                         In Service
>>
>>           1            prepago         es
>> default                         Out of Ser
>>
>>           2            prepago         es
>> default                         Out of Ser
>>
>>         .
>>
>>         31            prepago         es
>> default                         Out of Ser
>>
>>
>>
>>             In the PBX side (Siemens SDE, SS7 protocols like EWSD),
>> the status seems to be down.
>>
>>             When a set debug for SS7, I see this:
>>
>>
>>
>>             *CLI> ss7 debug linkset 1
>>
>> Enabled debugging on linkset 1
>>
>> *CLI> Len = 3 [ 81 82 00 ]
>>
>> FSN: 2 FIB 1
>>
>> BSN: 1 BIB 1
>>
>>> [0] FISU
>>
>>
>>
>> Len = 2 [ 82 81 ]
>>
>> FSN: 1 FIB 1
>>
>> BSN: 2 BIB 1
>>
>> <[0] LSSU SIOS
>>
>>
>>
>> Link state change: INSERVICE -> IDLE
>>
>> Len = 2 [ ff ff ]
>>
>> FSN: 127 FIB 1
>>
>> BSN: 127 BIB 1
>>
>> <[0] LSSU SIO
>>
>>
>>
>> Link state change: IDLE -> ALIGNED
>>
>> Len = 2 [ ff ff ]
>>
>> FSN: 127 FIB 1
>>
>> BSN: 127 BIB 1
>>
>> <[0] LSSU SIE
>>
>>
>>
>> Link state change: NOTALIGNED -> PROVING
>>
>> T4 expired!
>>
>> Link state change: PROVING -> ALIGNEDREADY
>>
>> Len = 3 [ ff ff 00 ]
>>
>> FSN: 127 FIB 1
>>
>> BSN: 127 BIB 1
>>
>>> [0] FISU
>>
>>
>>
>> Len = 1 [ ff ]
>>
>> FSN: 127 FIB 1
>>
>> BSN: 127 BIB 1
>>
>> <[0] FISU
>>
>>
>>
>> Link state change: ALIGNEDREADY -> INSERVICE
>>
>> Len = 20 [ ff 80 11 81 0c 72 83 0c 11 a0 32 35 36 34 32 38 36 32 38
>> 38 ]
>>
>> [ ff 80 11 ]
>>
>> FSN: 0 FIB 1
>>
>> BSN: 127 BIB 1
>>
>>> [0] MSU
>>
>>         [ 81 ]
>>
>>         Network Indicator: 2 Priority: 0 User Part: STD_TEST
>>
>>         [ 0c 72 83 0c ]
>>
>>         OPC 12813 DPC 12812 SLS 0
>>
>>         [ 11 ]
>>
>>         H0: 1 H1: 1
>>
>>         Message type: COO
>>
>>
>>
>> Len = 21 [ ff 80 14 81 0d 32 83 1c 11 d0 03 01 54 45 53 54 5f 43 4f
>> 4e 46 ]
>>
>> [ ff 80 14 ]
>>
>> FSN: 0 FIB 1
>>
>> BSN: 127 BIB 1
>>
>> <[0] MSU
>>
>>         [ 81 ]
>>
>>         Network Indicator: 2 Priority: 0 User Part: STD_TEST
>>
>>         [ 0d 32 83 1c ]
>>
>>         OPC 12812 DPC 12813 SLS 1
>>
>>         [ 11 ]
>>
>>         H0: 1 H1: 1
>>
>>         Message type: COO
>>
>>
>>
>> Len = 23 [ 80 81 14 81 0c 72 83 0c 21 d0 03 01 54 45 53 54 5f 43 4f
>> 4e 46 49 47 ]
>>
>> [ 80 81 14 ]
>>
>> FSN: 1 FIB 1
>>
>> BSN: 0 BIB 1
>>
>>> [0] MSU
>>
>>         [ 81 ]
>>
>>         Network Indicator: 2 Priority: 0 User Part: STD_TEST
>>
>>         [ 0c 72 83 0c ]
>>
>>         OPC 12813 DPC 12812 SLS 0
>>
>>         [ 21 ]
>>
>>         H0: 1 H1: 2
>>
>>         Message type: COA
>>
>>
>>
>>             I appreciate very much your help.
>>
>>
>>
>> Regards,
>>
>> Claudio Aznar
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> <zaptel.conf>
> <zapata.conf>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7