[asterisk-ss7] disable and re-enable dchans

[TCB]

Sure , the problem is i have 4 signalling links running on TS1-4 and the
other three
are not supposed to go down when i stop sig on TS1 .

On 6/21/07, Matthew Fredrickson <creslin at digium.com> wrote:
>
> If you stop asterisk, it will stop sending LSSUs :-)
>
> ---
> Matthew Fredrickson
> Software Engineer
> Digium, Inc.
>
> On Jun 21, 2007, at 5:04 AM, TCB wrote:
>
> > Hello All,
> >
> > Trying to do some MTP2/MTP2 tests with Telco , one of the
> > requirements is
> > for me to disable and re-enable signalling links , I have 4
> > signaling links running
> > on the same span. I have tried a script to disable and renable the
> > channel in
> > zaptel.conf and run ztcfg . for some reason the channel still
> > doesnt go off , Telco
> > stil get LSSU from my end .
> >
> > Any Ideas welcome .
> >
> > --
> > TC
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
TC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070621/b861b5e8/attachment-0001.htm