[asterisk-ss7] 2 links/linksets

[Goke Aruna]

yusuf wrote:
> Goke Aruna wrote:
>> yusuf wrote:
>>
>>> Hi,
>>>
>>> So today I started getting to know chan_ss7.  The issue is I want to
>>> test chan_ss7, but I only have 1 Asterisk box and 1 4-port Diiagium E1
>>> card.  I want to know, and please understand my ignorance of ss7 :),
>>> if I only have 1 box, with a Digium 4 port E1 card, and I want to dial
>>> out on port1 and recieve the call on port2, do I configure two links
>>> with one linkset, or two seperate linksets (I am following the
>>> templates)
>>>
>>> Also, with the above config, is this correct:
>>>
>>> [link-l1]
>>> linkset => outgoing1
>>> channels => 1-15,17-31
>>> schannel => 16
>>> firstcic => 1
>>> enabled => yes
>>>
>>> [link-l2]
>>> linkset => incoming2
>>> channels => 1-15,17-31
>>> schannel => 16
>>> firstcic => 32
>>> enabled => yes
>>>
>>> is my channels labled correctly?
>>>
>>>
>>>
>>>
>>
>> Yusuf,
>>
>> with what you pasted, it should be 2 linksets. however,  i guess first
>> cic on the second e1 should be 33 not 32.
>> the schannels should not be specified on the second link, since you have
>> only one signalling link for the two links.
>>
> Hi,
>
> is that two linksets with two links or two linksets with four links.
> Am I a being amazingly stupid even asking that?
> What is a link, what is a linkset, and what is the difference, and the
> relaionship between them?
>
>
>
Linkset consists of link(s), while links is the set of cics on the same
physical interface.

I have a working config of the setup that dedicated one e1 for incoming
and second for another routes.

[linkset-incorp2]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => seq_lth
subservice => auto
language => en
context => ipx-out

[linkset-incorp1]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => seq_lth
subservice => auto
language => en
context => ixp-out

[link-l1]
linkset => incorp2
channels => 1-15,17-31
schannel => 16
firstcic => 1
echocancel=allways
echocan_taps=32
echocan_train=350
enabled => yes

[link-l2]
linkset => incorp2
channels => 1-15,17-31
schannel =>
firstcic => 33
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes

[link-l3]
linkset => incorp1
channels => 1-15,17-31
schannel =>
firstcic => 65
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes

[link-l4]
linkset => incorp1
channels => 1-15,17-31
schannel =>
firstcic => 97
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => yes

[link-l5]
linkset => incorp2
channels => 1-15,17-31
schannel =>
firstcic => 129
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => no

[link-l6]
linkset => incorp2
channels => 1-15,17-31
schannel =>
firstcic => 161
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => no

[link-l7]
linkset => incorp2
channels => 1-15,17-31
schannel =>
firstcic => 193
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => no

[link-l8]
linkset => incorp2
channels => 1-15,17-31
schannel =>
firstcic => 225
echocancel=allways
echocan_taps=32
;echocan_train=350
enabled => no

[host-INC2]
enabled => yes
opc => 906
default_linkset => incorp2
dpc => incorp2:902,incorp1:902
links => l1:1,l2:2,l3:3,l4:4
;,l5:5,l6:6,l7:7,l8:8

goksie