[asterisk-ss7] Re: Turning up A-Links

[Michael Tague]

Hi,

On this topic of signaling links versus bearer traffic.

Is it possible to just use the Asterisk box to bring in the signaling,
A-links only, and then via Asterisk MGCP control a media gateway like a
Cisco 5400?

That is, the SS7 information can be used with MGCP to control bearer traffic
that is not actually terminating in the Asterisk box?

Thanks,
Michael Tague
tague at AmericanCLEC.com
502-815-7171

----- Original Message ----- 
From: "Matthew Fredrickson" <creslin at digium.com>
To: <asterisk-ss7 at lists.digium.com>
Sent: Tuesday, January 30, 2007 3:19 PM
Subject: Re: [asterisk-ss7] Re: Turning up A-Links


>
> On Jan 30, 2007, at 9:08 AM, Joe Mays wrote:
>
> >> Well, in chan_ss7 you should be able to configure one E1 with only a
> >> signalling link, and another as the bearer. But you do need at least
> >> one
> >> signalling link per chan_ss7 box.
> >
> > Does this imply that you cannot set a circuit up with only a
> > signalling link in libSS7?
>
> Of course you can set up just a signalling link in libss7.  But like
> chan_ss7, you must have at least one signalling link per box w/ libss7.
>
> Matthew fredrickson
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>