[asterisk-ss7] setting up two asterisk server as ss7 back to back.

[Goke M Aruna]

On 12/3/07, Anton <anton.vazir at gmail.com> wrote:
> Try to switch off the hardware echo canceler
> TDMV_HWEC       = YES
>
> On Monday 03 December 2007, Goke Aruna wrote:
> > I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0
> > on FC7 all went okay. using sangoma a104dx on both
> > machine.
> >
> > I followed the write up on
> > http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7
> >+setup
> >
> > I have the cross over cable between them.
> >
> > however, wanpipe shows connected but the signaling link
> > does not align.
> >
> > i have my configs for host A
> >
> > ##wanpipe1.conf
> >
> > [devices]
> > wanpipe1 = WAN_AFT_TE1, Comment
> >
> > [interfaces]
> > w1g1 = wanpipe1, , TDM_VOICE, Comment
> >
> > [wanpipe1]
> > CARD_TYPE       = AFT
> > S514CPU         = A
> > CommPort        = PRI
> > AUTO_PCISLOT    = NO
> > PCISLOT         = 4
> > PCIBUS          = 15
> > FE_MEDIA        = E1
> > FE_LCODE        = HDB3
> > FE_FRAME        = NCRC4
> > FE_LINE         = 1
> > TE_CLOCK        = MASTER
> > TE_REF_CLOCK    = 0
> > TE_HIGHIMPEDANCE        = NO
> > LBO             = 120OH
> > TE_SIG_MODE     = CCS
> > FE_TXTRISTATE   = NO
> > MTU             = 1500
> > UDPPORT         = 9000
> > TTL             = 255
> > IGNORE_FRONT_END = NO
> > TDMV_SPAN       = 1
> > TDMV_DCHAN      = 0
> >
> > [w1g1]
> > ACTIVE_CH       = ALL
> > TDMV_ECHO_OFF   = NO
> > TDMV_HWEC       = YES
> >
> >
> > # zaptel.conf
> >
> > loadzone=uk
> > defaultzone=uk
> >
> > span=1,1,0,ccs,hdb3
> > bchan=1-31
> >
> > ### ss7.conf
> >
> > [linkset-ennie]
> > enabled => yes
> > use_connect => yes
> > enable_st => no
> > hunting_policy => odd_lru
> > subservice => auto
> > context = default
> >
> > [link-l1]
> > linkset => ennie
> > channels => 1-15,17-31
> > schannel => 16
> > firstcic => 1
> > enabled => yes
> >
> > [link-l2]
> > linkset => ennie
> > channels => 1-31
> > schannel =>
> > firstcic => 33
> > enabled => yes
> >
> > [link-l3]
> > linkset => ennie
> > channels => 1-31
> > schannel =>
> > firstcic => 65
> > enabled => no
> >
> > [link-l4]
> > linkset => ennie
> > channels => 1-31
> > schannel =>
> > firstcic => 97
> > enabled => no
> >
> > [host-A]
> > enabled => yes
> > opc => 998
> > dpc => ennie:98
> > links => l1:1
> >
> >
> > for the slave host B
> >
> > ##wanpipe1.conf
> >
> > [devices]
> > wanpipe1 = WAN_AFT_TE1, Comment
> >
> > [interfaces]
> > w1g1 = wanpipe1, , TDM_VOICE, Comment
> >
> > [wanpipe1]
> > CARD_TYPE       = AFT
> > S514CPU         = A
> > CommPort        = PRI
> > AUTO_PCISLOT    = NO
> > PCISLOT         = 4
> > PCIBUS          = 15
> > FE_MEDIA        = E1
> > FE_LCODE        = HDB3
> > FE_FRAME        = NCRC4
> > FE_LINE         = 1
> > TE_CLOCK        = NORMAL
> > TE_REF_CLOCK    = 0
> > TE_HIGHIMPEDANCE        = NO
> > LBO             = 120OH
> > TE_SIG_MODE     = CCS
> > FE_TXTRISTATE   = NO
> > MTU             = 1500
> > UDPPORT         = 9000
> > TTL             = 255
> > IGNORE_FRONT_END = NO
> > TDMV_SPAN       = 1
> > TDMV_DCHAN      = 0
> >
> > [w1g1]
> > ACTIVE_CH       = ALL
> > TDMV_ECHO_OFF   = NO
> > TDMV_HWEC       = YES
> >
> >
> > # zaptel.conf
> >
> > loadzone=uk
> > defaultzone=uk
> >
> > span=1,0,0,ccs,hdb3
> > bchan=1-31
> >
> > ### ss7.conf
> >
> > [linkset-mahmud]
> > enabled => yes
> > use_connect => yes
> > enable_st => no
> > hunting_policy => odd_lru
> > subservice => auto
> > context = default
> >
> > [link-l1]
> > linkset => mahmud
> > channels => 1-15,17-31
> > schannel => 16
> > firstcic => 1
> > enabled => yes
> >
> > [link-l2]
> > linkset => mahmud
> > channels => 1-31
> > schannel =>
> > firstcic => 33
> > enabled => no
> >
> > [link-l3]
> > linkset => mahmud
> > channels => 1-31
> > schannel =>
> > firstcic => 65
> > enabled => no
> >
> > [link-l4]
> > linkset => mahmud
> > channels => 1-31
> > schannel =>
> > firstcic => 97
> > enabled => no
> >
> > [host-B]
> > enabled => yes
> > opc => 98
> > dpc => mahmud:998
> > links => l1:1
> >
> >
> >
> > Can someone advice on the way forward or has anyone
> > implemented chan_ss7-1.0.0.
> >
> > Thanks
> >
> > Goksie
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by
> > http://www.api-digital.com--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>

Thanks Anton.

It worked that way as suggested though I tried to avoid not turnning it off.

Goksie