[asterisk-ss7] Two Asterisk boxes, only ONE signal link

[Patrick Blackman]

Hi,

Right. The ss7.conf file of my "telco side" equipment doesn't include the
[cluster] section. One detail: I can see by your ss7.conf that you
configured 2 linksets, one for each link. I tried this at first, but could
not make the cluster work. So, I'm using just one linkset for the 2 links,
considering the 2 boxes in the cluster as one "virtual" server. This is my
config file for the "telco side" box:


[linkset-siuc]
enabled => yes
enable_st => no
use_connect => no
hunting_policy => seq_lth
context => default
language => da
t35 => 15000,timeout
subservice => auto

[link-l1]
linkset => siuc
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
echocancel => no
echocan_train => 350
echocan_taps => 128

[link-l2]
linkset => siuc
channels => 1-5
schannel =>
firstcic => 33
enabled => yes
echocancel => no
echocan_train => 350
echocan_taps => 128

[host-AST000010]
enabled => yes
default_linkset => siuc
opc => 0x1
dpc => siuc:0x2
links => l1:1,l2:2
if-1 => 192.168.0.60
Best regards,
Patrick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070411/7ebc7a3e/attachment.htm