[asterisk-ss7] STP and ISUP Point codes

[Matthew Fredrickson]

On Sep 6, 2006, at 11:37 AM, Tawanda Charles Bwanya wrote:

> zaptel.conf
> #Span=1
> span=1,2,0,ccs,hdb3
> bchan=1-15
> dchan=16
> bchan=17-31
> #Span=2
> span=2,1,0,ccs,hdb3
> bchan=32-46
> dchan=47
> bchan=48-62
> #Span=3
> span=3,3,0,ccs,hdb3
> bchan=63-77
> dchan=78
> bchan=79-93
> #Span=4
> span=4,4,0,ccs,hdb3
> bchan=94-108
> dchan=109
> bchan=110-124
> #Span=5
> span=5,5,0,ccs,hdb3
> bchan=125-155
> #Span=6
> span=6,6,0,ccs,hdb3
> bchan=156-186
> #Zone Defaults
> loadzone=uk
> defaultzone=uk

On a bit of a side note, you've probably only got one or maybe two 
signalling link channels, right?  So you probably don't need to reserve 
a "dchan" entry on each span, just on the spans that the relevant 
signaling channels are located.

>
> zapata.conf
>
> [trunkgroups]
> ;trunkgroup => 1,16,78
> ;trunkgroup => 1,47
> ;;spanmap => 1,1
> spanmap => 1,1
> ;spanmap => 3,1
> ;spanmap => 4,2

Don't mess with the spanmap/trunkgroup settings.  They are for NFAS 
PRIs.

>
> [channels]
>  context=default
>
> signalling = ss7
>
> ss7type = itu
>
> linkset = 1 (had set this to DZ causing seg fault)
>
> pointcode = 27
>
> adjpointcode = 38
>
> defaultdpc = 14
>
> cicbeginswith = 1
>
>  networkindicator=national
>
> sigchan = 47
>
> channel = 32-46
> channel = 48-62
>
> Error>>>>
>  ERROR[26857]: chan_zap.c:8224 ss7_linkset: Got exception 5!
> [Sep  6 18:21:45] ERROR[26857]: chan_zap.c:8234 ss7_linkset: Error in 
> write Unknown error 500[Sep  6 18:21:45] ERROR[26857]: chan_zap.c:8224 
> ss7_linkset: Got exception 4!
> [Sep  6 18:21:45] ERROR[26857]: chan_zap.c:8234 ss7_linkset: Error in 
> write Unknown error 500[Sep  6 18:21:45] ERROR[26857]: chan_zap.c:8224 
> ss7_linkset: Got exception 
> 5!                                                 
> chan_zap.c:8234 ss7_linkset: Error in write Unknown error 500

All of this is ok, but it looks like you might have had your signalling 
link not plugged in (it was in alarm state) when asterisk was started.  
Try having it plugged in, and then starting asterisk afterwards.  If 
you would like for me to login to take a look at it, contact me either 
off list, or via AIM as MatthewFredrickson or on IRC as Cresl1n 
(irc.freenode.net).

Matthew Fredrickson

>
>
> On 9/6/06, Matthew Fredrickson <creslin at digium.com> wrote:
>> On Sep 6, 2006, at 11:16 AM, Tawanda Charles Bwanya wrote:
>>
>> > Thanks for the quick response Matthew , sadly i have been sitting 
>> here
>> > all
>> > day trying to get libss7 working coz i had seen that facility but my
>> > asterisk
>> > keeps crashing when it tries to load chan_zap. Im not getting much 
>> on
>> > the
>> > log files . I'm trying to set it up on Gentoo 2006.0 . I had 
>> chan_ss7
>> > working
>> > fine on the same machine.
>>
>> Can you post your zaptel.conf, zapata.conf, and the relevant error 
>> that
>>  you get when it tries to load chan_zap?
>>
>> Also, what version are you using (i.e. when did you check out libss7
>> and asterisk-ss7)
>>
>> Matthew Fredrickson
>>
>> _______________________________________________
>>  --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7