[asterisk-ss7] ANSI SS7

[Matthew Fredrickson]

Oh, wait, nevermind.  That's not going to work for ANSI.  ss7linktest 
defaults to ITU mode and I haven't written a way to change it.  If 
you're really feeling adventurous, you can look in ss7linktest.c and 
change the ss7 type from SS7_ITU to SS7_ANSI.  If you do that, and do a 
`make` again, it should bring it up in ANSI mode.

Matthew Fredrickson

On Oct 18, 2006, at 4:58 PM, Jason L. Nesheim wrote:

> The link won't actually come up at all.  This message scrolls through 
> asterisk so fast that it's impossible to do anything in the CLI when I 
> start it.  The odd part is that now that I downloaded the latest 1.4 
> beta 2 zaptel and installed that and rebooted the box it seems that 
> the messages have stopped but now asterisk is doing nothing at all 
> with the SS7.  No messages appear in the logs relating to it and my 
> CopperCom sits in an activating state on the f-link.  The config is 
> the same as before, any ideas?
>
> -----Original Message-----
> From: asterisk-ss7-bounces at lists.digium.com 
> [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Matthew 
> Fredrickson
> Sent: Wednesday, October 18, 2006 2:15 PM
> To: asterisk-ss7 at lists.digium.com
> Subject: Re: [asterisk-ss7] ANSI SS7
>
> Unless you're seeing link related problems (link doesn't come up and
> those are scrolling continuously) you shouldn't worry about those
> messages.  MTP2 is designed to work around link layer hickups such as
> this.  You may see better performance though if you set your dchan to
> hardhdlc instead (though that only works on the TE4xxp and TE2xxp).
>
> Matthew Fredrickson
>
> On Oct 18, 2006, at 12:07 PM, Jason L. Nesheim wrote:
>
>> I'm getting a strange error when I start up asterisk and I can't tell
>> if it's a problem with the ss7 linkset or something hardware related.
>>  
>> This is what asterisk outputs:
>> [Oct 18 12:02:16] ERROR[7160]: chan_zap.c:8273 ss7_linkset: HDLC 
>> Abort!
>>  
>> This is the SS7 part of my Zapata.conf:
>>  
>> signalling = ss7
>>  
>> ss7type = ansi
>>  
>> linkset = 1
>>  
>> pointcode = 351400
>>  
>> adjpointcode = 351240
>>  
>> defaultdpc = 351240
>>  
>> networkindicator=national
>>  
>> cicbeginswith = 1001
>> sigchan = 1
>> channel = 2-24              
>>  
>> This is from my zaptel.conf:
>>  
>> span=1,1,0,esf,b8zs
>> bchan=2-24
>> dchan=1    
>> defaultzone=us
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7