[asterisk-ss7] chan_ss7.c: Failure in ZT_SPECIFY for circuit 1: Device or resource busy

[leonimar cape]

Hi,

I am not sure if this has a bearing, but try
converting your point codes to hexadecimal format.

Hope this helps.

--- ADEGOKE ARUNA <goksie at gmail.com> wrote:

> Dear all,
> 
> I realise this list is for the expert, however, you
> can make me an expert
> too when you find time to help me out.
> 
> Can somebody give me a working ss7.conf?
> I have a 4 E1 to my provider (using Alcatel s12) and
> I have only one
> signaling link.
> 
> The opc and dpc are in decimal.
> Each time I run the asterisk it gives errors below
> 
>   == Parsing '/etc/asterisk/ss7.conf': Found
> Mar 17 13:06:35 NOTICE[5196]: config.c:318
> load_config_linkset: Using
> default context 'default' for linkset 'siuc'
> Mar 17 13:06:35 NOTICE[5196]: config.c:320
> load_config_linkset: Using
> default language '' for linkset 'siuc'
> Mar 17 13:06:35 NOTICE[5196]: config.c:463
> load_config_link: Configured link
> 'l1' on linkset 'siuc', firstcic=1
> Mar 17 13:06:35 NOTICE[5196]: config.c:463
> load_config_link: Configured link
> 'l2' on linkset 'siuc', firstcic=33
> Mar 17 13:06:35 NOTICE[5196]: config.c:463
> load_config_link: Configured link
> 'l3' on linkset 'siuc', firstcic=65
> Mar 17 13:06:35 NOTICE[5196]: config.c:463
> load_config_link: Configured link
> 'l4' on linkset 'siuc', firstcic=97
> Mar 17 13:06:35 WARNING[5196]: config.c:622
> load_config_host: Missing
> interface entries for host 'WIRELESS2'.
> Mar 17 13:06:35 NOTICE[5196]: config.c:772
> load_config: Configuring DPC 60
> for linkset 'siuc'.
> Mar 17 13:06:36 WARNING[5196]: chan_ss7.c:4285
> setup_cic: Failure in
> ZT_SPECIFY for circuit 1: Device or resource busy.
> Mar 17 13:06:36 WARNING[5196]: loader.c:414
> __load_resource: chan_ss7.so:
> load_module failed, returning -1
>     -- SS7 channel unloaded.
> Mar 17 13:06:36 WARNING[5196]: loader.c:554
> load_modules: Loading module
> chan_ss7.so failed!
> 
> 
> Ss7.conf is as below
> [linkset-siuc]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => even_mru
> subservice => auto
> 
> [link-l1]
> linkset => siuc
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> enabled => yes
> 
> [link-l2]
> linkset => siuc
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => yes
> 
> [link-l3]
> linkset => siuc
> channels => 1-31
> schannel =>
> firstcic => 65
> enabled => yes
> 
> [link-l4]
> linkset => siuc
> channels => 1-31
> schannel =>
> firstcic => 97
> enabled => yes
> 
> [host-WIRELESS2]
> enabled => yes
> opc => 900
> dpc => siuc:60
> links => l1:1,l2:2,l3:3,l4:4
> 
> I am using sangoma A104D which I confirmed from them
> and the sangoma said it
> works with chan_ss7.
> 
> Can someone help out?
> 
> 
> 
> goksie
> 
> 
> 
> From: asterisk-ss7-bounces at lists.digium.com
> [mailto:asterisk-ss7-bounces at lists.digium.com] On
> Behalf Of Jacob Tinning
> Sent: Thursday, March 16, 2006 3:25 PM
> To: asterisk-ss7 at lists.digium.com
> Subject: Re: [asterisk-ss7] My experiences with
> chan_ss7.
> 
> On Thu, 16 Mar 2006, Kai Militzer wrote:
> 
> > Now something different that came to my mind right
> now. As I said in my
> > first posting I have E1 in use right now. I only
> use one signaling link
> > on the first E1 right now. Nevertheless I had to
> define a signaling link
> > on the second E1 even if I don't use it.
> 
> You don't need to do that. You can make your
> ss7.conf look like this:
> 
> ; First E1 with signalling on timeslot 16
> [link-l1]
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> 
> ; Second E1 with no signalling and audio on 31
> timeslots.
> [link-l2]
> channels => 1-31
> schannel =>
> firstcic => 33
> 
> > So I give away one channel I could use for voice.
> For four E1 it would
> > be already three channels not usable.
> 
> Yeah. It would be a shame to have unused timeslots
> on an E1. fortunately you
> can avoid this :)
> 
> Mvh. Jacob
> 
> -- 
> Jacob Tinning
> System Developer                                    
>       SIFIRA A/S
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-ss7
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com