[asterisk-ss7] chan_ss7 + Astersik JitterBuffer

[Patrick]

On Mon, 2006-06-26 at 19:51 +0530, Mr.Surender Reddy wrote:
> Dear sir,
>              Thankx for the Mail.I have built with asterisk with
> jitter buffer patch for 1.2.9 for the latest one there was no change
> it was the same.But when u said me to compile with chan_ss7 with
> -DAST_JB added to the CFLAGS of the chan_ss7 Makefile if you have
> built Asterisk 1.2.x with the jitterbuffer patch applied this is not
> clear for me to 

If you have built & installed asterisk 1.2.9 *with* the jitterbuffer
patch then I think you need to add -DAST_JB to the CFLAGS in the
Makefile of chan_ss7 and rebuild and install it. If you *don't* use the
jitterbuffer patch with asterisk 1.2.9 then you do *not* need to add
-DAST_JB to the CFLAGS of the chan_ss7 Makefile. Hope this is clearer
now.

> Check it sir.As per my application we have Dell Power Edge with Digium
> card the server has 8 Gbram and Dual processor with Raid 5 .

Make sure that the Digium card is on it's own interrupt and that the
Digium card is *not sharing* an interrupt with something else. I think
there is background information about this on www.asteriskguru.com

> We are using the SS7 with asterisk for my calling cards business
> sir.People are not buying the cards because of the Audio lost or
> gichhy problem of audio.we are using Completely Sip platfrom sir.If u
> can make the things little easy that would be fine for me sir i hope u
> will not mind in making the things clear.

If you continue to have these problems I suggest you hire a local
Asterisk consultant to help you find and hopefully fix the problems.

Regards,
Patrick