[asterisk-ss7] Version 0.8.4 of chan_ss7 for asterisk released

[Anton]

You should read the manual. You have to point where is your 
asterisk and zaptel sources are. Everything is in readme.

On 10 June 2006 17:25, Mr.Surender Reddy wrote:
> Dear sir,
>                 This is the problem iam getting when iam
> trying to install the new version of ss7.
> can u plz guide me to install.
> [root at localhost chan_ss7-0.8.4]# make
> gcc -c  -g -pipe -Wall -Wstrict-prototypes
> -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT
> -D_GNU_SOURCE -DPIC -fpic -o cluster.o cluster.c
> gcc -c  -g -pipe -Wall -Wstrict-prototypes
> -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT
> -D_GNU_SOURCE -DPIC -fpic -o config.o config.c
> gcc -c  -g -pipe -Wall -Wstrict-prototypes
> -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT
> -D_GNU_SOURCE -DPIC -fpic -o chan_ss7.o chan_ss7.c
> chan_ss7.c:57:20: zaptel.h: No such file or directory
> chan_ss7.c: In function `ss7_new':
> chan_ss7.c:631: error: `ZT_FLUSH_ALL' undeclared (first
> use in this function)
> chan_ss7.c:631: error: (Each undeclared identifier is
> reported only once chan_ss7.c:631: error: for each
> function it appears in.) chan_ss7.c:632: error:
> `ZT_FLUSH' undeclared (first use in this function)
> chan_ss7.c: In function `ss7_send_digit':
> chan_ss7.c:725: error: `ZT_DIAL_OPERATION' undeclared
> (first use in this function)
> chan_ss7.c:725: error: syntax error before "zo"
> chan_ss7.c:730: error: `zo' undeclared (first use in this
> function) chan_ss7.c:730: error: `ZT_DIAL_OP_APPEND'
> undeclared (first use in this function)
> chan_ss7.c:734: error: `ZT_DIAL' undeclared (first use in
> this function) chan_ss7.c: In function
> `ss7_handle_event':
> chan_ss7.c:1868: error: `ZT_EVENT_DIALCOMPLETE'
> undeclared (first use in this function)
> chan_ss7.c:1871: error: `ZT_DIALING' undeclared (first
> use in this function) chan_ss7.c: In function
> `get_zaptel_event':
> chan_ss7.c:1896: error: `ZT_GETEVENT' undeclared (first
> use in this function)
> chan_ss7.c: In function `ss7_read':
> chan_ss7.c:1942: error: `ELAST' undeclared (first use in
> this function) chan_ss7.c: In function `ss7_exception':
> chan_ss7.c:2049: error: `ZT_GETEVENT' undeclared (first
> use in this function)
> chan_ss7.c: In function `zt_enable_ec':
> chan_ss7.c:2409: error: `ZT_AUDIOMODE' undeclared (first
> use in this function)
> chan_ss7.c:2414: error: `ZT_ECHOCANCEL' undeclared (first
> use in this function)
> chan_ss7.c:2422: error: `ZT_ECHOTRAIN' undeclared (first
> use in this function)
> chan_ss7.c: In function `zt_disable_ec':
> chan_ss7.c:2439: error: `ZT_ECHOCANCEL' undeclared (first
> use in this function)
> chan_ss7.c: In function `continuity_check_thread_main':
> chan_ss7.c:3691: error: `ELAST' undeclared (first use in
> this function) chan_ss7.c: In function `setup_cic':
> chan_ss7.c:4500: error: `ZT_BUFFERINFO' undeclared (first
> use in this function)
> chan_ss7.c:4500: error: syntax error before "bi"
> chan_ss7.c:4526: error: `ZT_SPECIFY' undeclared (first
> use in this function) chan_ss7.c:4531: error:
> `ZT_LAW_ALAW' undeclared (first use in this function)
> chan_ss7.c:4532: error: `ZT_SETLAW' undeclared (first use
> in this function) chan_ss7.c:4537: error: `bi' undeclared
> (first use in this function) chan_ss7.c:4537: error:
> `ZT_POLICY_IMMEDIATE' undeclared (first use in this
> function)
> chan_ss7.c:4541: error: `ZT_SET_BUFINFO' undeclared
> (first use in this function)
> chan_ss7.c:4547: error: `ZT_SET_BLOCKSIZE' undeclared
> (first use in this function)
> make: *** [chan_ss7.o] Error 1
>
> regards
> surender
>
> On 6/8/06, Mr.Surender Reddy <gvsurenderreddy at gmail.com> 
wrote:
> > Dear sir ,
> >                 When iam making the new SS7 iam getting
> > errors sir can u pplz help us.
> >
> > regards
> >  surender
> >
> > On 6/7/06, Anders Baekgaard <ab at sifira.com> wrote:
> > > An updated version of chan_ss7 for asterisk has been
> > > released as version 0.8.4. This version has been
> > > tested against asterisk version 1.2.9.1.
> > >
> > >
> > > From the README:
> > > - Fixed crash when T1 expires
> > > - Made check on audio read to detect underruns
> > > - Fixed crash in process_acm
> > > - Changed priority for continuity check thread
> > > - Fixed crash in CLI command block/unblock
> > > - Fixed CLI command output: "Unknown state: 3"
> > > - Listen on cluster socket only when there are other
> > > cluster nodes configured
> > > - Port for TCP connection in cluster now configurable
> > > - Use of ast_setstate to report channel state changes
> > > - New per link config options to enable echo
> > > cancellation in Zaptel driver
> > > - New CIC hunting policies: sequential low-to-high
> > > and sequential high-to-low
> > >
> > > Additional information and the source of chan_ss7 can
> > > be found at http://www.sifira.dk/chan-ss7.
> > >
> > > Best regards,
> > > Anders Baekgaard
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by
> > > Easynews.com<http://easynews.com/>--
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   
> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7