[asterisk-ss7] chan_ss7 - possibility to chose link?

[Anton]

I don't think this will work, since W03 know nothing about 
signalling channel. Though I'll try it

On 13 December 2006 18:25, asterisk at nicox.org wrote:
> I think there is no need to configure a second linkset on
> the carrier side, you can use the Signalling channel of
> the first link and only use other CIC, that must be
> possible, in the next 3 weeks i will make a configuration
> like this. after this time i can give you news about
> this, but ofcourse thats to long for you.!?
>
> i think a configuration like this should work:
>
> [linkset-W05]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => seq_lth
> context => ss7
> language => da
> t35 => 15000,timeout
> subservice => auto
>
> [linkset-W03]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => even_mru
> context => W03
> language => de
> t35 => 15000,timeout
> subservice => auto
>
>
> [link-l1]
> linkset => W05
> channels => 2-31
> schannel => 1
> firstcic => 0
> enabled => yes
> echocancel => no
> echocan_train => 350
> echocan_taps => 128
>
> [link-l2]
> linkset => W03
> channels => 1-31
> schannel =>
> firstcic => 31
> enabled => yes
>
> [host-srv25]
> enabled => yes
> default_linkset => W05
> opc => 8802
> dpc => W05:8304,W03,8304
> links => l1:1,l2:2
>
> On Wed, 13 Dec 2006, Marc Storck wrote:
> > See the Thread: [asterisk-ss7] Some Feature-Questions
> >
> > It does not work for everybody, as the carrier on the
> > other side probably doesn't want or is unable to
> > configure 2 linksets.
> >
> > I can only welcome Anton's idea.
> >
> > Best regards,
> >
> > Marc
> >
> > Vernier Umali wrote:
> >> Maybe you could set different linksets for the 2 links
> >> and address them accordingly when dialling.
> >>
> >> On 12/13/06, Anton <anton.vazir at gmail.com> wrote:
> >>> Hi! Have anyone implemented the possibility to chose
> >>> a link in linkset to be dialed through?
> >>>
> >>> For example in configuration
> >>>
> >>> [linkset1]
> >>>
> >>> [link-l1]
> >>> linkset => linkset1
> >>>
> >>> [link-l2]
> >>> linkset => linkset1
> >>>
> >>> we have 2xE1 configured in the linkset 1 and so
> >>> choice of hunting policy is only in high-to -low or
> >>> low-to-high or so, BUT if I do need to dial EXACTLY
> >>> through [link-l1] or [link-l2] - there is no such a
> >>> way. If anyone have and can share a patch - I'll very
> >>> appreciate.
> >>>
> >>> in principle making something like
> >>>
> >>> [trunkgroup-trunkgroup1]
> >>> add_channel => link-l1/1-15,17-31
> >>> add_channel => link-l2/1-31
> >>>
> >>> would be great.
> >>>
> >>> Regards,
> >>> Anton.
> >>> _______________________________________________
> >>> --Bandwidth and Colocation provided by Easynews.com
> >>> --
> >>>
> >>> asterisk-ss7 mailing list
> >>> To UNSUBSCRIBE or update options visit:
> >>>   
> >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> asterisk-ss7 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>  
> >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >  http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7